HP 2710p manual Broadcom 4311BG Wireless LAN, 802.11b/g WiFi Adapter Standards

QuickSpecs

HP Compaq 2710p Notebook PC

Technical Specifications

Configuration Utility5 Microsoft Windows 2000 or XP

Choice of Configuration Utility:

Microsoft Windows XP Wireless Network Connection Manager

Broadcom Wireless Configuration Utility (required for Cisco

Compatible Extensions support)

Microsoft Windows Vista

Microsoft Windows Vista Wireless Network Connection Manager

LED Activity LED Off – Radio OFF; Solid LED On – Radio ON

1.Check latest software/driver release for updates on supported security features.

2.Maximum output power may vary by country according to local regulations.

3.In Power Save Polling mode.

4.Receiver sensitivity is measured at a packet error rate of 8% for 802.11b (CKK modulation) and a packet error rate of 10% for 802.11a/g (OFDM modulation).

5.WLAN supplier's client utility is required for Cisco Compatible Extensions support with Microsoft Windows 2000 or XP. WLAN may also be compatible with certain third-party software supplicants.

Broadcom 4311BG	Wireless LAN	IEEE 802.11b
802.11b/g WiFi Adapter Standards		IEEE 802.11g
	Interoperability	Wi-Fi certified
		Cisco Compatible Extensions Program compliant with Microsoft
		Windows 2000 and XP (details at
		http://www.hp.com/go/notebooks/WLAN)
	Frequency Band	2.4 GHz
	Data Rates	802.11b: 1, 2, 5.5, 11 Mbps
		802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
	Modulation	Direct Sequence Spread Spectrum
		DBPSK, DQPSK, CCK, OFDM
	Security1	Supports 64- and 128-bit WEP, WPA, WPA2, hardware-accelerated
		AES, 802.1x authentication types EAP-TLS, EAP-TTLS, PEAP-GTC,
		PEAP-MSCHAPv2, LEAP, EAP-FAST.
		Support for Cisco Security Features (proven compatibility with Cisco
		Aironet infrastructure products through the Cisco Compatible
		Extensions Program Version 4).
	Sub-channels	Multinational support with frequency bands and channels compliant to
		local regulations.
	Media Access Protocol CSMA/CA (Collision Avoidance) with ACK
	Network Architecture	Ad-hoc (Peer to Peer)
	Models	Infrastructure (Access Point Required)
	Roaming	IEEE 802.11 compliant roaming between access points
	Output Power (for	17.5 dBm
	CKK)2
	Output Power (for	15 dBm
	OFDM; power varies by
	data rate)2
	Power Consumption	Transmit: 2.0 W (max)
		Receive: 1.5 W (max)
		Idle mode3: 390 mW (nominal)
		Sleep mode: 20 mW (max)

DA - 12718 Worldwide QuickSpecs — Version 11 — 8.27.2007 Page 31