Using optical drives (select models only)
An optical drive, such as a
All optical drives can read from optical discs, as described in the following table.
Optical drive type | Read from CD and | Write to | Write to DVD±RW | Write to DVD+R DL |
|
| discs | discs | |
|
|
|
|
|
Yes | No | No | No | |
|
|
|
|
|
CAUTION: To prevent possible audio and video degradation, or loss of audio or video playback functionality, do not initiate Standby while reading from a CD or DVD.
If Standby is initiated during playback of a disc, you may experience the following behaviors:
●Your playback may be interrupted.
●You may see a warning message asking if you want to continue. If this message is displayed, click No.
●You may need to restart the CD or DVD to resume audio and video playback.
Inserting an optical disc (CD or DVD)
1.Turn on the computer.
2.Press the release button (1) on the drive bezel to release the disc tray.
3.Pull out the tray (2).
4.Hold the disc by the edges to avoid touching the flat surfaces and position the disc
NOTE: If the tray is not fully accessible, tilt the disc carefully to position it over the spindle.
Using optical drives (select models only) 63