HP 2533t Mobile Printers supported when locally attached, Using the Found new hardware dialog

Printers supported when locally attached

The following printers are supported locally-attached to the thin client via a USB or parallel connection, and will be detected and installed automatically via plug-and-play:

Supported with plug and play

1320 series	2420 series	2605 series	2700 series	3050 AiO
3052 AiO	3055 AiO	3390 AiO	3392 AiO	4345mfp series
4700 series	4730 MFP series	5200 series	5550 series	CM2320 MFP series
CM3530 MFP series	CM4730 MFP series	CP2020 series	CP3505 series	CP3520 series
CP4005 series	M2727 MFP series	M3027 MFP series	M3035 MFP series	M4345 MFP series
M5025 MFP	M5035 MFP series	P2015 series	P2050 series	P3005 series

Appendix B: Manual plug-and-play installation of supported printers

If a printer is not listed as supported locally-attached, but it is supported when network-attached, it may still work when locally attached – however no guarantee is made in that regard; careful testing should be made in a variety of print scenarios to attest that the device is working as expected.

Using the “Found new hardware” dialog

When a printer not supported locally-attached is first connected to the thin client, a plug-and-play “Found new hardware” dialog will pop-up. One can manually force the device to use the UPD for Thin Clients driver by executing the steps that follow:

1 – On the first step of the “Found New Hardware Wizard”, select the option “No, not at this time” and click “Next”:

2 – On the second wizard step, shown below, select “Install from a list of specific location (Advanced)” and click “Next”:

9