HP TOWERFEED 8000 manual Configuring the TowerFeed Option, Optional Paper Sources Configure Tab

INSTALLATION

Configuring the TowerFeed Option

To configure your printer with the TowerFeed option, go to the Control Panel, select Printers and there the respective HP LaserJet driver.

Click on Properties, and in the respective window the Configure tab.

Fig. 11a Optional Paper Sources

Fig 11 Configure Tab

In this window click in the pull-down bar for the Optional Paper Sources: to select your TowerFeed model (Fig. 11a). The artwork on the right will show the selected printer with the TowerFeed model installed (Fig. 11).

When clicking on the Paper tab you will see in the Source is: all available paper sources of your printer including the TowerFeed paper trays (Fig. 12).

Fig. 12 Paper Tab Fig. 13 Page Setup (Word 7)

In the application programs you select the paper sources in the Paper Setup function (File - Page Setup), where all available paper sources show up in the respective Paper Sources: pull-down bar(s) (Fig. 13).

Note:

For further information on Tray and Media Type definition please also refer to APPENDIX B - Tips & Hints of this manual.

IU 661 / 0047 10 TowerFeedTM for the HP LaserJet 8150/8100/8000