HP C6340, C6380, C6350 manual Ethernet

Page 10

B - Ethernet

a. Locate your Ethernet/network cable.

b. Remove the yellow plug from the back of the device. c. Connect one end of the Ethernet/network cable to the

Ethernet port on the back of the device.

d. Connect the other end of the Ethernet/network cable to the router (not in the Internet port).

e. Go to Section D of this Setup Guide to install your software.

Important: Your computer and the HP All-in-One must be on the same active, working network.

If you are using a DSL or cable modem, make sure you do not connect the Ethernet/network cable from the HP All-in-One to the cable modem. Connect it to the router only.

10 • HP Photosmart C6300 All-in-One series

Image 10
Contents Start Here HP Photosmart C6300 All-in-One series Connect the power cord and adapter Carriage latch Colored icons Minutes. You will hear the device making noises Lower the output Ethernet USB USB Troubleshooting Ethernet HP Photosmart C6300 All-in-One series CLR D1 Ethernet D2 Ethernet Network Troubleshooting Explore the features Print a 4 x 6 inch photo
Related manuals
Manual 39 pages 11.1 Kb Manual 331 pages 38.76 Kb