General Rules

Rules for the Safe Installation and Operation of Your

Furnace...

Check local codes, the installation must comply with strict conformance in regard to clearances.

The Furnace must be installed on a noncombustible floor.

Connect the furnace to tile lined inside masonry chimney or approved insulated all fuel prefabricated chimney only.

Keep smoke pipe connection as short as possible, using a minimum 24 gauge pipe with a minimum 1/2" per foot rise from the flue collar to the chimney opening.

Be sure there is a sufficient supply of combustion air to the area where the furnace is to be located.

Do not over draft the furnace! It is designed to operate at

.04 to .06 inches of water column and must be set with a draft gauge to maintain a steady draft.

Do not use flammable liquids for starting a fire.

Do not store fuel or combustibles near the furnace. Some areas of the furnace are hot and could cause an explosion and possible bodily or property damage.

Store all ashes in a metal container with a tight sealing lid and allow ashes to cool before disposing of them, possibly a week.

Familiarize yourself with the furnace's solid fuel burning characteristics before leaving unit unattended for long pe- riods of time.

The loading door and ash door must be tightly closed dur- ing furnace operation to insure safety and efficiency.

CAUTION-

The furnace has hot surfaces. Keep Children Away. Do not touch during operation.

In the event of a chimney fire call the fire depart- ment, then be sure the furnace doors are closed tightly and the power to the unit is turned off.

The furnace is designed to burn air dried wood and coal at a predetermined firing rate. Over firing could result in dam- age to the heat exchanger and cause dangerous opera- tion. Over firing occurs when the ash door is left open during operation or a highly volatile fuel, such as large amounts of small kindling, is used. Note: This action voids all warranty.

Follow a regular service and maintenance schedule of the furnace and chimney for efficient and safe operation.

Do not leave the ash door open when the fire is burning.

Do not let ashes build up closer than 2" to the grate.

With new steel, there is a small amount of oil or dirt on the metal. You may smell an odor. This is normal during the first operation. You should assemble the furnace out of doors and build a small fire in it to "burn off" this dirt and oil before installing the unit.

During the first few fires, heat may slightly warp the front and back panels. This is normal and will not hamper your unit's operation.

DONOTCONNECTTHISUNITTOACHIMNEYFLUESERV- INGANOTHERAPPLIANCE.

BURNWOODORCOALONLYINMODEL24AF. DONOT MIXOTHERTHANTHEUSEOFWOODTOSTARTACOAL FIRE.

DANGER - Risk of Fire or Explosion: Do not burn gar- bage, gasoline, drain oil or other flammable liquids.

WARNING - Risk of Fire:

Do not operate with flue draft exceeding 6 inches water column.

Do not operate with fuel loading or ash removal doors open.

Do not store fuel or other combustible material within marked installation clearances.

Inspect and clean flues and chimney regularly.

This Furnace Must Be Installed By A Qualified Installer.

Page 4

USSC

24AZ, 24AF, 24AG specifications

The United States Stove Company has long been a trusted name in heating solutions, and their models 24AF, 24AZ, and 24AG exemplify the brand's commitment to quality and efficiency. These versatile wood stoves cater to a range of heating needs while emphasizing performance, durability, and user comfort.

Starting with the 24AF model, this stove is designed for efficiency and warmth. With a heating capacity of up to 1,500 square feet, it's ideal for medium-sized spaces. The 24AF features a large firebox that allows for extended burn times, making it suitable for those who want to minimize the need for frequent reloading. The stove includes an EPA-certified design, ensuring that it operates with reduced emissions, which is not only beneficial for the environment but also for the health of occupants.

Next, the 24AZ model stands out with its elegant cast iron construction, which enhances both durability and aesthetic appeal. This model also offers a similar heating capacity but is equipped with a glass door that allows users to enjoy the sight of the flames while ensuring efficient heat distribution. The 24AZ incorporates a sophisticated air wash system that keeps the glass door clean, providing unobstructed views of the fire while minimizing maintenance concerns.

Lastly, the 24AG model brings a modern twist to traditional heating solutions. Ideal for those looking for efficiency without compromising on style, the 24AG features a compact design that fits seamlessly into smaller spaces. With a focus on energy efficiency, this model can deliver consistent heat output while using less wood, further reducing your environmental footprint. The cast iron construction also ensures that heat is retained longer, providing warmth even after the fire dies down.

All three models come with adjustable air controls, allowing users to manage burn rates and heat output according to their personal preferences. The robust construction of each unit ensures longevity, while the user-friendly designs make them accessible for homeowners of all experience levels. Whether you're heating a cozy cabin or a larger home, the United States Stove 24AF, 24AZ, and 24AG models stand out for their reliability and craftsmanship, offering practical solutions for modern heating needs.