HP 3210v, 3210xi Connect the power cord, Press the On button and conﬁgure, Open the access door

Page 3

6 Connect the power cord

USB cable users: Do not connect the USB cable until instructed later in this guide.

7 Press the On button and conﬁgure

On

a After you press the On button, the blue light ﬂashes, and then becomes solid. This may take up to a minute.

b Wait for the language prompt before continuing. Use the arrow keys to select your language, press OK, and then conﬁrm. Use the arrow keys to select your country/region, press OK, and then conﬁrm.

	8 Open the access door
a	b

HP All-in-One • 3

Image 3

Contents Locate components Remove all tape and lift displayLoad paper trays Attach the control panel faceplate If not attachedConnect the power cord Open the access doorPress the On button and conﬁgure Insert all six ink cartridges Lift latches inside of the deviceTurn on your computer Close the access door and follow the promptsUSB Connection Do not connect yet Choose ONE connection type a or BWindows Users A1 Insert the correct CDA3 Go to back of the guide to make a test copy A2 Connect the USB cableConnect the Ethernet cable B2 Insert the correct CD B4 Go to back of the guide to make a test copy Install software on additional computersMake a test copy

Related manuals

Manual 144 pages 40.21 Kb