B3 Install software on additional computers
If you have additional computers on your network, install the
HP
HP
Follow the onscreen instructions. Make sure that you choose the connection type between the network and your HP
B4 Go to the last page to make a test copy
Troubleshooting
Problem: A Carriage Jam message appears.
Action: Open the access door. Remove the tape from inside the device. Turn the power off, and then wait one minute. Turn the power on again.
Problem: You did not see the screen prompting you to connect the USB cable.
Action: Remove, and then
Problem: The Microsoft Add Hardware screen appears.
Action: Click Cancel. Unplug the USB cable, and then insert the HP
Windows CD. Refer to Section A.
Problem: The Device Setup Has Failed To Complete screen appears.
Action: Verify that the control panel faceplate is firmly attached. Unplug the
HP
HP