Windows 3.1x Installation
1Insert the HP OfficeJet Pro 1150C
2From the Program Manager, select the File menu and choose Run.
3Type D:\setup substituting the correct drive letter for the D. If you are installing from diskettes, type your floppy drive letter. Press the Enter key on your keyboard.
4Follow the instructions on the screen. Generally you should select Typical installation and click Next, Yes, Continue, OK or Finish on each screen, and insert each disk as prompted to install the software.
NOTE If you are installing from diskettes, you will be prompted to restart your computer between sections of software. This is not necessary. You only need to restart the computer at the end.
If you do not have Win32S installed on your computer, it will be installed for you during the installation process. As part of the Win32S installation, you have the option of installing a game called FreeCell. The game is used to test the Win32S installation. If the game appears to work fine, the Win32S installation was successful. You do not need to play the game for any particular length of time.
IMPORTANT As part of the software installation process, a test is performed to confirm communication between your PC and the HP OfficeJet Pro 1150C. Results of the test will be presented on your PC monitor. If the bidirectional communica- tions test fails, it is highly recommended you read important information about bidirectional communication and ECP in the ECP document that is located in your HP OfficeJet Pro Utilities program group/folder.
If bidirectional communication is not established during the communications test, you must manually set the front panel language and paper size. Refer to “Change the Front Panel Language” in Chapter 2.