Service Hints, Chimney Maintenance | United States Stove 1261

WARNING!

NEVER STORE FLAMMABLE LIQUIDS,

ESPECIALLY GASOLINE. IN THE

VICINITY OF THE HEATER.

CAUTION!

OVERFIRING THE APPLIANCE MAY CAUSE A HOUSE FIRE. IF A UNIT OR CHIMNEY CONNECTOR GLOWS, YOU ARE OVERFIRING.

WARNING!

NEVER OPERATE THIS HEATER WITH THE

FUEL DOOR OPEN.

WARNING!

USE ONLY THE LEGS PROVIDED WITH THIS HEATER. REFER TO STEP 5 IN THE "INSTAL- LATION" SECTION OF THIS MANUAL.

Service Hints

Do not expect a heater to draw. It is the chimney that creates the draft. Smoke spillage into the house or excessive buildup of water or creosote in the chimney are warnings that the chimney is not functioning properly. Correct problem before using heater. Possible causes are:

1.The connector pipe may push into the chimney too far, stopping the draft. (Fig. 7)

2.Do not connect two heaters into the same chimney flue.

3.The chimney used for a heater must not be used to ventilate the cellar or basement. If there is a cleanout opening at the base of the chimney, it must be closed tightly.

Chimney Maintenance

Creosote - Formation and Need for Removal

When wood is burned slowly, it produces tar and other organic vapors, which combine with expelled moisture to form creosote. The creosote vapors condense in the rela- tively cool chimney flue of a slow burning fire. As a result, creosote residue accumulates on the flue lining. When ignited, this creosote makes an extremely hot fire.

The chimney connector and chimney should be inspected at least twice monthly during the heating season to deter- mine if a creosote buildup has occurred.

CAUTION!

NEVER USE GASOLINE, GASOLINE-TYPE LANTERN FUEL, KEROSENE, CHARCOAL LIGHTER FLUID, OR FLAMMABLE LIQUIDS TO START OR "FRESHEN UP" A FIRE IN THE HEATER.

CAUTION!

USE WOOD OR WOOD-LIKE MATERIALS

ONLY. DO NOT USE COAL OR

CHARCOAL. COAL OR CHARCOAL WILL DESTROY THE FIREBOX. DO NOT USE DRIED LUMBER OR TREATED WOOD.

NOTE:

DO NOT ELEVATE FIRE OR USE WITH A GRATE - BUILD FIRE DIRECTLY ON THE HEARTH.

WARNING!

DO NOT OBSTRUCT THE SPACE BENEATH

THE HEATER

4.If the chimney is operating too cool, water will condense in the chimney and run back into the stove. Creosote formation will be rapid and may block the chimney. Operate the heater at a high enough fire to keep the chimney warm preventing this condensation.

5.If the fire burns well but sometimes smokes or burns slowly, it may be caused by the chimney top being lower than another part of the house or a nearby tree. The wind blowing over a house or tree, falls on top of the chimney like water over a dam, beating down the smoke. The top of the chimney should be at least 3 feet above the roof and be at least to 2 feet higher than any point of the roof within 10 feet (Fig. 6).

If creosote has accumulated, it should be removed. Failure to remove creosote may cause a house fire. Creosote may be removed by using a chimney brush or other commonly available materials.

Chimney fires burn very hot. If the chimney connector should glow red, immediately call the fire department, then reduce the fire by closing the inlet air control and pour a large quantity of coarse salt, baking soda or cool ashes on top of the fire in the firebox. CAUTION: A chimney fire may cause ignition of wall studs or rafters which you thought were a safe distance from the chimney. If you have a chimney fire, have your chimney inspected by a qualified person before using again.

1261 specifications

The United States Stove Company 1261 is a striking and efficient wood-burning stove designed to provide warmth and comfort to homes while embracing classic craftsmanship. This stove has been a favorite among homeowners and outdoor enthusiasts alike, offering a blend of traditional style and modern performance.

One of the standout features of the 1261 is its high efficiency. With a maximum output of 77,000 BTUs, this stove can heat spaces of up to 2,000 square feet, making it an ideal choice for both small and large rooms. The efficient design allows for longer burn times, reducing the need for frequent refueling. This not only enhances convenience but also contributes to a more sustainable heating method.

The 1261 utilizes advanced combustion technology, including an air wash system that keeps the glass door clean. This feature is particularly appreciated by users because it maintains a clear view of the mesmerizing flames without requiring constant cleaning. Additionally, the secondary combustion system maximizes efficiency by burning off gases and particulates that would otherwise escape unburned, thus providing more heat and reducing emissions.

Constructed from heavy-duty steel, the United States Stove 1261 boasts durability and longevity. The robust build ensures that the stove can withstand high temperatures while maintaining its structural integrity. Furthermore, the cast iron door not only adds to the stove’s classic aesthetic but also provides optimal airflow control, allowing users to adjust the heat output with precision.

The stove comes equipped with a variety of features aimed at maximizing user experience. An easy-to-use draft control allows for simple adjustments, ensuring that the fire burns at the desired intensity. The large firebox is designed to accommodate larger logs, promoting longer burn times and reducing the frequency of loading.

In terms of design, the United States Stove 1261 features a traditional look that can complement various home decors. Its compact size allows for versatile placement within any room, whether in a rustic cabin or a modern home. With its combination of efficiency, durability, and classic design, the United States Stove 1261 is a reliable choice for those seeking an effective heating solution. It stands as a testament to the craftsmanship and innovation that the United States Stove Company is known for, making it a great addition to any household.