United States Stove 2007B owner manual Congratulations, Tools and Materials Needed, Dimensions

CONGRATULATIONS!

You've purchased a heater from North America's oldest manufacturer of wood burning products.

By heating with wood you're helping to CONSERVE ENERGY!

Wood is our only Renewable Energy Resource. Please do your part to preserve our wood supply. Plant at least one tree each year. Future generations will thank you.

Tools and Materials Needed

	TOOLS	MATERIALS
•	Pencil	• 6" Pipe, 6" Elbow, Collar and Thimble; As Required (24 gauge min.)
• 6 Foot Folding Rule or Tape Measure		• 1/2" Sheet Metal Screws (No. 10A x 1/2")
• Drill, Hand or Electric		• 6" Inside Diameter Underwriters Laboratories (UL) Listed Residential
• Drill Bit 1/8" Dia. (For Sheet Metal Screws)		Solid Fuel Factory-Built Triplewall Chimney or Exiting Masonry Chimney.
• 5/16" Nut Driver or 5/16" Socket w/Ratchet		• Floor Protector Material As Specified in this manual.
•	Screw Driver (Blade-Type)	• Furnace Cement (Manufacturer Recommends: Rutland Black Code
•	Gloves	78 or Equivalent)

•Safety Glasses

Dimensions

(TOP VIEW)

(FRONT VIEW)

(SIDE VIEW)

2