HP 320 320 manual Remove the pink tape Do not touch here, Insert the cartridge

results from modifying or refilling HP cartridges is not covered by the HP warranty.

For best print quality, HP recommends that you install all retail print cartridges before the date stamped on the box.

Insert or replace the print cartridge

Prepare the printer and cartridge

1 Make sure the power is on and you have removed the cardboard from inside the printer.

2 Open the print cartridge access door of the printer.

3 Remove the bright pink tape from the cartridge.

Remove the pink tape

Do not touch here

Insert the cartridge

1 If you are replacing a cartridge, push down and pull outward on the cartridge in the cradle to remove it.

2 Hold the replacement cartridge with the label on top. Slide the cartridge at a slight upward angle into the cradle so the copper-colored contacts go in first. Push the cartridge until it snaps into place.

3 Close the print cartridge access door.

The idle screen of the printer displays an icon showing the approximate ink level for the installed cartridge (100%, 75%, 50%, 25%, and nearly empty). No ink- level icon appears if the cartridge is not a genuine HP cartridge.

HP Photosmart 320 series Reference Guide 13