Load originals for scanning and copying, Make a copy

(continued)

Light status		What it means


		NOTE: Your printer might be packaged with only a tri-color print
		cartridge.


The On, Check Paper, and Check		Scanner failure.
Print Cartridge lights are blinking.		Turn off the HP All-in-One, then on again. If the problem persists, contact
		HP Support.

All lights are blinking.		The HP All-in-One has a fatal error.
	1.		Turn the HP All-in-One off.
	2.		Unplug the power cord.
	3.		Wait a minute, then plug the power cord back in.
	4.		Turn the HP All-in-One back on.
		If the problem persists, contact HP Support.

Load originals for scanning and copying

You can load many different types and sizes of paper in the HP All-in-One, including letter or A4 paper, photo paper, transparencies, and envelopes.

For information about loading full-size paper, see the Setup Guide. For information about loading other paper sizes, see the onscreen Help.

1.Lift the lid on the HP All-in-One.

2.Place your original with the side you want to copy or scan face down on the left front corner of the glass.

TIP: To get the correct copy size, make sure that there is no tape or other foreign object on the glass.