Configure tray
When using tray 1 for a specific size of paper, you can set the default size for the tray in HP ToolboxFX or from the control panel. In HP ToolboxFX, select Paper handling, and then select the size for the tray.
To set the default paper size or type from the control panel, complete the following steps.
1.On the product control panel, press Setup.
2.Use the arrow buttons to select System setup, and then press OK.
3.Use the arrow keys to select Paper setup, and then press OK.
4.Use the arrow keys to select the tray to be configured, and then press OK.
5.Use the arrow keys to select either Paper type or Paper size, and then press OK.
6.Use the arrow keys to select a default type or size for the tray, and then press OK.
ENWW | Configure tray 7 |