Copyright and Trademark Information

The information in this document is subject to change without notice.

Hewlett-Packard makes no warranty of any kind with regard to this document, including, but not limited to, the implied warranties of merchantability and ﬁtness for a particular purpose. Hewlett-Packard shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Warranty. A copy of the speciﬁc warranty terms applicable to your Hewlett-Packard product and replacement parts can be obtained from your local Sales and Service Ofﬁce.

Reproduction, adaptation, or translation of this document without prior written permission is prohibited, except as allowed under the copyright laws.

UNIX is a registered trademark of The Open Group.

Safety Information

WARNING All inputs/outputs are Safety Extra Low Voltage (SELV) circuits.

CAUTION The hardware contains electronic components that can be damaged by static electricity. To avoid damage, follow these guidelines:

•Store the hardware in its conductive plastic bag.

•If possible, work in a static-free area.

•Handle circuit boards by the edges only.

Do not touch electronic components or electrical traces. We strongly recommend that you use a grounding wrist strap that is connected to the metallic chassis of the host computer. If you do not have a wrist strap, touch the chassis before handling adapters and frequently thereafter to equalize any static charge.

LED Safety Information

The optic module provided in the HP A5483A HP-PCI ATM/622 adapter meets LED AEL Class 1 requirements per

EN 60825-1:1994 (+ A11) and EN 60825-2:1994.

Wavelength: 1300 nm.

Regulatory Information

Optic Module

The optic module provided in the HP A5483A HP-PCI ATM/622 adapter conforms to the ITU-T recommendation G.957 cat I-1 or I-4.

For the United States

Federal Communications Commission (FCC) Radio Frequency Interference Statement.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that might cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of the equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Hewlett-Packard’s system veriﬁcation tests were conducted with HP-supported peripheral devices and cables, such as those received with the system. Changes or modiﬁcations to this equipment not expressly approved by Hewlett-Packard could void the user’s authority to operate the equipment.

For Canada

For Canadian Regulations ICES-003.

Complies with Canadian Electromagnetic compatibility (EMC) Class A requirements.

Conforme à Classe A des normes canadiennes de compatibilité électromagnétique (CEM).

For Europe

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

HP Part No.

A5483-90004

Hewlett-Packard Company

Printed in USA E1299