HP ZR2440w IPS manual 2ZR2440w Front Panel Controls

ZR2440w Model

The default input on the ZR2440w is DisplayPort and the scan order is initially set to DisplayPort, DVI-D, HDMI. You can change the current input, the default and the scan order through the OSD. Pressing the + button on the front of the monitor will take you directly to the OSD source-control submenu.

Figure 3-2ZR2440w Front Panel Controls

Control			Function
1		Menu	Opens, selects or exits the OSD menu.
2		Minus	If the OSD menu is on, press to navigate backward through
			the OSD menu and decrease adjustment levels.
3		Plus/source	If the OSD menu is on, press to navigate forward through
			the OSD menu and increase adjustment levels.
			If the OSD menu is inactive, press to activate the source
			button that chooses the video signal input (VGA, DVI, or
			DisplayPort).
4	OK	OK	If the OSD menu is on, press to select the highlighted
			menu item.
5		Power	Turns the monitor on or off as long as the master power
			switch on the rear panel is on.
6		Power LED	Blue = Fully powered.
			Amber = Sleep mode.
			Flashing Amber = Sleep Timer mode.

No light indicates power off, or normal operation if the LED is suppressed.

Overview of Operation 25