1Fibre Channel Adapter Installation for HP-UX
This chapter contains installation prerequisites, guidelines, and procedures for the A6795A host bus adapter. This chapter addresses the following topics:
“Prerequisites” on page 4
“Important Patches and Updates” on page 5 “Installing Driver Software” on page 6 “Installing Adapter Hardware” on page 8
“Attaching the Adapter to Other Fibre Channel Devices” on page 11 “Verifying Installation” on page 11
“Verifying Connectivity” on page 12
“Interpreting Legacy Hardware Paths
Thank you for purchasing HP I/O Cards
If you are installing an HP I/O card as an
If this card was factory installed in your server, see “Verifying Installation” on page 11.
HP welcomes your input. Please email us at: netinfo_feedback@cup.hp.com
with comments or suggestions on HP I/O Cards or related documentation.
All product documentation, including a comprehensive Support Guide, Installation Guide, Release Notes, Support Matrix are available online at: http://docs.hp.com
1.Within the “Internet & Networking” category select “I/O Cards and Networking Software”
2.Select “Fibre Channel”
3.Click on the Fibre Channel documentation product.
3