HP vs17x 17 inch, vs17x-wm 17 inch manual Setting Up the Monitor

Setting Up the Monitor

3.Holding the pedestal-base assembly so it cannot fall, remove the four screws 2. Use a Phillips-head screwdriver. Lift the assembly 3 and set it aside.

4.Save the removed items (screws, back cover, and pedestal-base assembly) for future use.

5.Mount the f monitor to a swing arm or other mounting fixture.

The four threaded mounting holes on the monitor panel are spaced 100 mm apart and are compliant with the VESA standard for mounting flat-panel monitors.

Use the four holes to attach a swing arm or other mounting fixture. Follow the instructions included with the mounting fixture, to ensure that the monitor is safely attached.

6.Assemble the speakers. Refer to “Assembling the f Monitor Satellite Speakers” in this chapter.

To reinstall the desktop pedestal-base assembly for the f monitor:

1.Remove the mounting fixture.

2.Reverse the preceding instructions to attach the pedestal-base assembly onto the panel (be sure to insert the top two screws first), and then replace the rectangular back cover and snap it into place on the monitor.

3–12 User’s Guide