Table A-1 ProDisplay P17A LED Backlit Monitor Specifications (continued)
Measured Power Consumption:
Full Power | 20 watts |
| |
Typical Settings | 15.2 watts |
| |
Sleep | <0.5 watts |
| |
Switch Off | <0.5 watts |
| |
|
|
Input Terminal | One VGA connector (cable included) |
|
|
NOTE: For the latest specifications or additional specifications on this product, go to http://www.hp.com/go/productbulletin/ and search for your specific display model to find the model- specific QuickSpecs.
Recognizing Preset Display Resolutions
The display resolutions listed below are the most commonly used modes and are set as factory defaults. This monitor automatically recognizes these preset modes and they will appear properly sized and centered on the screen.
Table A-2 ProDisplay P17A Factory Preset Modes
Preset | Pixel Format | Horz Freq (kHz) | Vert Freq (Hz) | |
|
|
|
| |
1 | 640 × 480 | 31.469 | 59.940 | |
|
|
|
| |
2 | 720 × 400 | 31.469 | 70.087 | |
|
|
|
| |
3 | 800 × 600 | 37.879 | 60.317 | |
|
|
|
|
|
4 | 1024 | × 768 | 48.363 | 60.004 |
|
|
|
| |
5 | 1280 x 720 | 45.000 | 60.000 | |
|
|
|
| |
6 | 1280 x 800 | 49.306 | 59.910 | |
|
|
|
|
|
7 | 1280 | × 960 | 60.00 | 60.00 |
|
|
|
|
|
8 | 1280 | × 1024 | 63.98 | 60.02 |
|
|
|
|
|
Entering User Modes
The video controller signal may occasionally call for a mode that is not preset if:
●You are not using a standard graphics adapter.
●You are not using a preset mode.
It this occurs, you may need to readjust the parameters of the monitor screen by using the
Recognizing Preset Display Resolutions 13