HP 25xi 25-inch Diagonal, 23xi Diagonal manual Setting Up the Monitor, Attaching the Monitor Base

2 Setting Up the Monitor

To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions below.

Attaching the Monitor Base

CAUTION: The screen is fragile. Avoid touching or applying pressure to the screen; doing so can cause damage.

TIP: For monitor displays with glossy bezels, consider the placement of the display, because the bezel might cause interfering reflections from surrounding light and bright surfaces.

1.Lift the monitor from its box and place it face down on a flat surface.

2.Insert the stand into the slot on the back of the display head until it clicks. Figure 2-1Inserting the stand

Attaching the Monitor Base 3