Connecting the cables
1.Lay the monitor panel face down on a flat surface covered by a clean, dry cloth.
2.Pull the cable cover off the rear of the monitor.
3.Depending on your configuration, connect either the DVI or HDMI video cable between the PC and the monitor.
NOTE: The video mode is determined by the video cable used. The monitor will automatically
determine which inputs have valid video signals. The inputs can be selected by pressing the Input button on the side panel or through the
●For HDMI digital operation, connect the HDMI signal cable to the HDMI connector on the rear of the monitor and the other end to the HDMI connector on your input device (cable provided).
4 Chapter 2 Setting up and using the monitor | ENWW |