Connecting the Speakers
The display is designed for use with speakers supplied with HP Pavilion computers. To connect the speakers:
1Identify the left and right speakers. You can tell which side a speaker fits onto by its mounting pegs. The side of the speaker with mounting pegs fits against the side of the display.
Tilt speakers toward front and push down
2Fit the pegs of the right speaker into the corresponding holes on the right side of the display.
3With the pegs in the corresponding holes, tilt the speaker toward the front of the monitor and push down until the speaker is secure.
4Repeat procedure for left speaker.
Refer to your computer setup poster for instructions to connect your speakers to the PC.