HP S231d 23-in IPS BLU Docking manual Connecting an HP Notebook Computer and Installing Drivers

Page 15

The monitor automatically scans the video input connections for an active signal at power on, and if using the monitor's default settings, will display video on the first input detected with an active signal. If two or more inputs are active, the default input and auto-switch input settings will determine the priority of the input signal being displayed. To switch between USB, DisplayPort and VGA inputs, press the Input Control button on the monitor's front panel.

Connecting an HP Notebook Computer and Installing Drivers

To use the monitor with an HP notebook computer, connect the USB cable between the notebook and monitor and install the USB and LAN drivers. The video signal is sent over the USB cable. The USB cable also enables all of the port replicator functions.

CAUTION: Do not install more than one set of USB graphics drivers. Doing so can cause software incompatibility issues between drivers and result in no picture on one of the displays.

You can install the drivers from the media disc included with the monitor before connecting the notebook to the monitor or you can install the drivers from the monitor's internal flash drive after connecting the notebook to the monitor.

To install the drivers from the monitor's internal flash drive:

1.Turn on power to the monitor and the HP notebook computer.

2.Connect one end of the provided USB cable to a USB connector on the notebook computer, and the other end to the upstream USB connector on the monitor.

NOTE: For optimal performance, connect the USB cable to a SuperSpeed USB or USB 3.0 port on the notebook. These ports are color-coded in blue or with an SS-USB icon. The monitor will also function when connected to a USB 2.0 port but will run at lower overall data rates.

3.After the USB cable is connected, an AutoPlay window will pop up on the notebook's screen. In the AutoPlay window, click on Open folder to view files.

NOTE: If the AutoPlay window does not pop up, open Microsoft Windows Explorer, navigate to and select the HP S231d drive, then proceed to the next step.

4.Double-click the SETUP file.

ENWW

Connecting an HP Notebook Computer and Installing Drivers 9

Page 14 Page 16
Image 15
Page 14 Page 16
Contents HP EliteDisplay S231d LED Backlit IPS Monitor First Edition February Document Part Number About This Guide Iv About This Guide Table of contents S231d Entering User Modes Sleep Timer Utility HP LCD Monitor Product FeaturesEnww Unfolding the Monitor Pedestal Base Setting Up the MonitorComponent Function Rear ComponentsConnecting the Monitor Cables Enww Enww Turning on the Monitor Connecting an HP Notebook Computer and Installing Drivers Install the HP S231d Driver Software Charging Your HP Notebook Computer Front Panel Controls Connecting Optional USB DevicesAdjusting the Monitor Enww Removing the Monitor Pedestal Base Mounting the Monitor Locating the Rating Labels Installing a Cable LockHaving a Video Chat or Making Conference Calls Using the WebcamInstalling YouCam from the media disc Capturing Webcam Video and SnapshotsWebcam Troubleshooting Creating a HP MyRoom Account Using HP MyRoomInstalling HP MyRoom from the media disc Downloading HP MyRoom from the InternetProduct Support Locating Additional InformationEliteDisplay S231d Technical SpecificationsS231d Recognizing Preset Display ResolutionsEntering User Modes Sleep Timer Utility
Top Page Image Contents