HP L2201x manual Energy Saver Feature

Table B-1L2201x Specifications (continued)

Measured Power Consumption:

Full Power	28 watts
Typical Settings	26.4 watts
Sleep	1 watt
Switch Off	1 watt
Input Terminal	One DisplayPort connector (cable
	included)

Energy Saver Feature

The monitors support a reduced power state. The reduced power state will be entered into if the monitor detects the absence of either the horizontal sync signal and/or the vertical sync signal. Upon detecting the absence of these signals, the monitor screen is blanked, the backlight is turned off, and the power light is turned amber. There is a brief warm up period before the monitor will return to its normal operating mode.

Refer to the computer manual for instructions on setting energy saver features (sometimes called power management features).

NOTE: The above power saver feature only works when connected to computers that have energy saver features.

By selecting the settings in the monitor's Energy Saver utility, you can also program the monitor to enter into the reduced power state at a predetermined time. When the monitor's Energy Saver utility causes the monitor to enter the reduced power state, the power light blinks amber.

ENWW Energy Saver Feature 15