HP LV1911 18.5-inch manual OSD Menu

OSD MENU

	Icon	Main Menu	Submenu	Description
		Brightness	Adjustable scale	Adjusts the brightness level of the screen. The
				factory default range is 90.
		Contrast	Adjustable scale	Adjusts the contrast level of the screen. The factory
				default range is 80.
		Color		Selects the screen color. The factory default is
				6500K or Custom Color, depending on the model.
			Warm (5000K)	Changes color to slightly reddish white.
			Standard (6500K)	Uses standard colors (default).
			Cool (9300K)	Changes color to slightly blueish white.
			Custom (RGB)	Selects and adjusts your own color scales:
				• Red Color - sets your own red color levels
				• Green Color - sets your own green color levels
				• Blue Color - sets your own blue color levels
		Image Control		Adjusts the screen Image. (VGA Input only)
			Auto Adjustment	Automatically adjusts the screen Image.
			Clock	Minimizes any vertical bars or strips visible on the
				screen background. Adjusting the Clock will also
				change the horizontal screen Image.
			Clock Phase	Adjusts the focus of the display. This adjustment
				allows you to remove any horizontal noise and clear
				or sharpen the image of characters.
			Horizontal Position	Adjusts the position of the screen Image left and
				right.
			Vertical Position	Adjusts the position of the screen Image up and
				down.
			Custom Scaling	Selects the method on how displayed information
				on the monitor will be formatted. Select:
				• Fill to Screen - image fills the entire screen and
				may look distorted or elongated because of
				non-proportlonal scaling of height and width.
				• Fill to Aspect Ratio - image Is sized to fit the
				screen and maintains proportional Image.
			Sharpness	Adjusts the screen image to look sharper or soft.
			Dynamic Contrast	Turns Dynamic Contrast Ratio On or Off. The
			Ratio	factory default is Off.
		OSD Control		Provides a menu for adjusting the on-screen display
				(OSD) controls.
			Horizontal OSD	Changes the viewing position of the OSD menu to
			Position	the left or right area of the screen. The factory
				default range Is 97.
			Vertical OSD Position	Changes the viewing position of the OSD menu to
				the top or bottom area of the screen. The factory
				default range is 18.
ENWW				Using the On-Screen Display (OSD) 13