HP E221 manual Turning on the Monitor

Page 19

Turning on the Monitor

1.Press the power button on the computer to turn it on.

2.Press the power button on the front of the monitor to turn it on.

CAUTION: Burn-in image damage may occur on monitors that display the same static image on screen for a prolonged period of time.* To avoid burn-in image damage on the monitor screen, you should always activate a screen saver application or turn off the monitor when it is not in use for a prolonged period of time. Image retention is a condition that may occur on all LCD screens. Monitors with a “burned-in image” are not covered under the HP warranty.

* A prolonged period of time is 12 consecutive hours of a static image.

NOTE: If pressing the power button has no effect, the Power Button Lockout feature may be enabled. To disable this feature, press and hold the monitor power button for 10 seconds.

NOTE: You can disable the power LED in the OSD menu. Press the Menu button on the front of the monitor, then select Management > Bezel Power LED > Off.

When the monitor is powered on, a Monitor Status message is displayed for five seconds. The message shows which input (DisplayPort, DVI, or VGA) is the current active signal, the status of the auto-switch source setting (On or Off; factory default is On), the default source signal (factory default is DisplayPort), the current preset display resolution, and the recommended preset display resolution.

The monitor automatically scans the signal inputs for an active input and uses that input for the display. If two or more inputs are active, the monitor will display the default input source. If the default source is not one of the active inputs, then the monitor will display the highest ranking priority input in the following order: DisplayPort, DVI, then VGA. You can change the default source in the OSD by pressing the front panel Menu button and selecting Input Control > Default Input.

Turning on the Monitor 13

Image 19
Contents HP EliteDisplay LED Backlit Monitors Fourth Edition December Document Part Number About This Guide Iv About This Guide Table of contents Page HP LCD Monitors Product FeaturesPage Unfolding the Monitor Setting Up the MonitorComponent Function Rear ComponentsConnecting the Cables Page Page Page Control Function Front Panel ControlsAdjusting the Monitor Page Setting Up the Monitor Turning on the Monitor HP Watermark and Image Retention Policy Connecting USB DevicesLocating the Rating Labels Installing a Cable LockReference Guides Finding More InformationProduct Support E201 Model Technical SpecificationsE221 Model Appendix a Technical SpecificationsIPS LCD E221i ModelE231 Model E241i Model E231i ModelE271i Model E271i Model E201 Model Recognizing Preset Display ResolutionsE221 Model E221i Model E231i Model E231 ModelE241i Model E271i Model Entering User Modes