Troubleshooting

Please make these simple checks before calling service.These tips may save you time and money since charges for receiver installation and adjustments of customer controls are not covered under your warranty.

Symptoms	Items to Check and Actions to follow

“Ghost ” or double image	• This may be caused by obstruction to the
		antenna due to high rise buildings or hills.
		Using a highly directional antenna may improve
		the picture.
No power	• Check if the TV’s AC power cord is plugged
		into the mains socket.
	• Unplug the TV, wait for 60 seconds.Then
		reinsert plug into the mains socket and turn on
		the TV again.
No picture	• Check antenna connections at the rear of the
		TV to see if it is properly connected to the TV.
	• Possible broadcast station trouble.
		Try another channel.
	• Adjust the contrast and brightness settings.
	• Check the Closed Captions control. Some
		TEXT modes could block the screen.
Good picture but no sound	•	Increase the VOLUME.
	• Check if the TV is muted; press the MUTE
		button on the remote control.
	• For PC operation, if a DVI to HDMI cable
		is used, make sure a separate audio cable is
		connected between the PC and MFM.
Good sound but poor colour	•	Adjust the contrast, colour and brightness
		settings.
Poor picture	• Poor picture quality may occur when an
		activated S-VHS camera or camcorder is
		connected to your TV and the other peripheral
		at the same time. Switch off one of the
		peripherals.
Snowy picture and noise	• Check the antenna connection.

Horizontal dotted line	• This may be caused by electrical interference
		(e.g. hairdryer, nearby neon lights, etc.)
	• Turn off the equipment.

Television not responding to remote control	• Check whether the batteries are working.
		Replace if necessary.
	• Clean the remote control sensor lens on the
		TV.
	• You can still use the buttons at the front of
		your TV.
	• Select the TV mode to ensure your remote
		control is set in the TV mode.