HP LA2405wg manual Optimizing Digital Conversion

Table 4-2OSD Menu (continued)

Icon	Main Menu	Submenu	Description
	Factory Reset		Returns all OSD menu settings and DDC/CI controls
			to the factory default settings, except the Language.
	Source Control		Selects the video input signal. DP (DisplayPort) is the
			factory default.
		DP	Selects DP (DisplayPort) as the video input signal.
		DVI	Selects DVI as the video input signal.
		VGA	Selects VGA as the video input signal.
		Default Source	Selects the default or primary video input signal when
			the monitor is connected to two active and valid video
			sources. The monitor will automatically determine the
			video format. The choices are:
			●	DP
			●	DVI
			●	VGA
			The factory default is DP (DisplayPort).
		Auto-Switch Source	Turns the system's automatic video signal input to On
			or Off. The factory default is On.
	Exit		Exits the OSD menu screen.

Optimizing Digital Conversion

Two controls in the on-screen display can be adjusted to improve image performance: Clock and Clock Phase.

NOTE: The Clock and Clock Phase controls are adjustable only when using an analog input. These controls are not adjustable for digital inputs.

The Clock must first be set correctly since the Clock Phase settings are dependent on the main Clock setting. Use these controls only when the auto-adjustment function does not provide a satisfactory image.

●Clock—Increases/decreases the value to minimize any vertical bars or stripes visible on the screen background.

●Clock Phase—Increases/decreases the value to minimize video distortion or video jitter.

NOTE: When using the controls, you will obtain the best results by using the auto-adjustment pattern software utility provided on the CD.

When adjusting the Clock and Clock Phase values, if the monitor images become distorted, continue adjusting the values until the distortion disappears. To restore the factory settings, select Yes from the Factory Reset menu in the on-screen display.

ENWW Adjusting the Monitor Settings 23