BENDIX BW2849 manual Description Type of Code Driving Technique 250, Seconds to set this fault

Fault Isolation Procedures

Fault	Hand-Held Codes
Codes	SID	FMI	Description	Type of Code	Driving Technique
31	250	2	J-1587 Data Link Signal	System	Key on. If the fault is present, the
					system should automatically detect the
					problem and set the code. If the fault
					is not present at key on, operate the
					vehicle and attempt to duplicate the
					driving conditions that triggered the
					fault code. Possible triggers include
					heat, vibration, and varying levels of
					throttle demand. It may take up to 75
					seconds to set this fault.	Service
33	248	12	VBUS	Component	system should automatically detect the
					Key on. If the fault is present, the	Procedure
					problem and set the code. If the fault
					is not present at key on, operate the
					vehicle and attempt to duplicate the
					driving conditions that triggered the
					fault code. Possible triggers include
					heat, vibration, and varying levels of
					throttle demand. It may take up to 75
					seconds to set this fault.
41			No Fault or End of Fault
			Codes

1-6