ASRock 960GM/U3S3 FX manual NB Frequency Multiplier, CPU NB Voltage, HT Bus Speed, HT Bus Width

NB Frequency Multiplier

For safety and system stability, it is not recommended to adjust the value of this item.

CPU NB Voltage

It allows you to adjust the value of CPU NB voltage. However, for safety and system stability, it is not recommended to adjust the value of this item.

HT Bus Speed

This feature allows you selecting Hyper-Transport bus speed. Configuration options: [Auto], [x1 200MHz] to [x11 2200MHz].

HT Bus Width

This feature allows you selecting Hyper-Transport bus width. Configuraion options: [Auto], [8 Bit] and [16 Bit].

Memory Configuration

Memory Clock

This item can be set by the code using [Auto]. You can set one of the standard values as listed: [400MHz DDR3_800], [533MHz DDR3_1066],

[667MHz DDR3_1333], [800MHz DDR3_1600] and [933MHz DDR3_1866].

DRAM Voltage

Use this to select DRAM voltage. The default value is [Auto].

Memory Timing

		BIOS SETUP UTILITY
OC Tweaker
Memory Timing
Power Down Enable		[Disabled]
Bank Interleaving		[Auto]
Channel Interleaving		[Auto]
CAS Latency (CL)	11	[Auto]
TRCD	11	[Auto]
TRP	11	[Auto]
TRAS	28	[Auto]
Command Rate	1	[Auto]
TRC	39	[Auto]		Select Screen
				Select Item
TWR	12	[Auto]
			+-	Change Option
TRFC	160	[Auto]
			F1	General Help
TRRD	5	[Auto]
			F9	Load Defaults
TWTR	6	[Auto]
			F10	Save and Exit
TRTP	6	[Auto]
			ESC	Exit
TFAW	24	[Auto]
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.

Power Down Enable

Use this item to enable or disable DDR power down mode.

Bank Interleaving

Interleaving allows memory accesses to be spread out over banks on the same node, or accross nodes, decreasing access contention.

Channel Interleaving

It allows you to enable Channel Memory Interleaving. The default value is [Auto].

41