ASRock 970DE3/U3S3 AMD C-State Support, Processor Maximum Frequency, Processor Maximum Voltage

AMD C-State Support

This allows you to enable or disable AMD C-State Support. The default value is [Enabled].

Processor Maximum Frequency

It will display Processor Maximum Frequency for reference.

North Bridge Maximum Frequency

It will display North Bridge Maximum Frequency for reference.

Processor Maximum Voltage

It will display Processor Maximum Voltage for reference.

Multiplier/Voltage Change

This item is set to [Auto] by default. If it is set to [Manual], you may adjust the value of Processor Frequency and Processor Voltage. However, it is recommended to keep the default value for system stability.

BIOS SETUP UTILITY

Main OC Tweaker Advanced H/W Monitor Boot Security Exit

EZ Overclocking

Load Optimized CPU OC Setting	[Press Enter]
CPU Configuration
Overclock Mode	[Auto]
CPU Frequency (MHz)	[200]
PCIE Frequency (MHz)	[100]
Spread Spectrum	[Auto]
Boot Failure Guard	[Enabled]
Boot Failure Guard Count	[3]
CPU Active Core Control	[All Cores]
AMD Turbo Core Technology	[Auto]
AMD C-State Support	[Enabled]
AMD APM	[Auto]
Processor Maximum Frequency	x31.5 6300 MHZ
North Bridge Maximum Frequency	x31.0 6200 MHz
Processor Maximum Voltage	1.5500 V
Multiplier/Voltage Change	[Manual]

Overclocking may cause damage to your CPU and motherboard.

It should be done at your own risk and expense.

	Select Screen
	Select Item
Enter	Go to Sub Screen
F1	General Help
F9	Load Defaults
F10	Save and Exit
ESC	Exit

v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.

CPU Frequency Multiplier

For safety and system stability, it is not recommended to adjust the value of this item.

CPU Voltage

It allows you to adjust the value of CPU voltage. However, for safety and system stability, it is not recommended to adjust the value of this item.

NB Frequency Multiplier

For safety and system stability, it is not recommended to adjust the value of this item.

CPU NB Voltage

It allows you to adjust the value of CPU NB voltage. However, for safety and system stability, it is not recommended to adjust the value of this item.

HT Bus Speed

This feature allows you selecting Hyper-Transport bus speed. The default value is [Auto].

35