ASRock 775i915PL-SATA2 manual

Page 13

For proper inserting, please ensure to match the two orientation key notches of the CPU with the two alignment keys of the socket.

Step 2-3. Carefully place the CPU into the socket by using a purely vertical motion.

Step 2-4. Verify that the CPU is within the socket and properly mated to the orient keys.

Step 3. Remove PnP Cap (Pick and Place Cap):

Use your left hand index finger and thumb to support the load plate edge, engage PnP cap with right hand thumb and peel the cap from the socket while pressing on center of PnP cap to assist in removal.

1.It is recommended to use the cap tab to handle and avoid kicking off the PnP cap.

2.This cap must be placed if returning the motherboard for after service.

Step 4. Close the socket:

Step 4-1. Rotate the load plate onto the IHS. Step 4-2. While pressing down lightly on load

plate, engage the load lever.

Step 4-3. Secure load lever with load plate tab under retention tab of load lever.

1 3

Image 13

Contents 775i915PL-SATA2 Disclaimer Copyright NoticeContents Software Support Introduction Package ContentsSpecifications See Caution For Windows 2000/Windows XP Motherboard Layout Table for Audio Output Connection ASRock 8CH I/OScrew Holes Pre-installation PrecautionsCPU Installation Page Installation of CPU Fan and Heatsink Installing a Dimm Installation of Memory Modules DimmAGI Express slot PCI Express x Installing an expansion cardPCIE2 Dual Graphics FeatureJumpers Setup Surround Display FeatureOn the motherboard Onboard Headers and ConnectorsInfrared Module Header Chassis Speaker Header Serial ATA Sata Hard Disks Installation Bios Menu Bar Main Screen Navigation KeysAdvanced Screen Boot Failure Guard CPU ConfigurationCPU Host Frequency Spread SpectrumRatio Status Ratio Cmos SettingRatio Actual Value CPU Thermal ThrottlingChipset Configuration Acpi Configuration IDE Configuration LBA/Large Mode IDE Device ConfigurationPCIPnP Configuration Super IO Configuration Floppy ConfigurationOnBoard Floppy Controller Serial Port AddressECP Mode DMA Channel Parallel Port ModeParallel Port Address EPP VersionHardware Health Event Monitoring Screen USB ConfigurationUSB Controller USB 2.0 SupportTarget CPU Temperature C Boot ScreenCPU Quiet Fan Tolerance CBoot From Network Boot Settings ConfigurationBoot Up Num-Lock Security ScreenExit Screen Load Optimal DefaultsSave Changes and Exit Discard Changes and ExitLGA 775 CPU Installation Live Demo Program Install Operating SystemSupport CD Information Running The Support CD

775i915PL-SATA2 specifications

The ASRock 775i915PL-SATA2 is a motherboard that caters to the needs of users looking for a balance of performance, functionality, and affordability. Designed for Intel's LGA 775 processors, it supports a wide range of CPUs from the Pentium 4 to the Core 2 Duo series. With its robust architecture, this motherboard is an ideal choice for both gamers and everyday users who desire reliability and speed.

One of the standout features of the ASRock 775i915PL-SATA2 is its incorporation of the Intel 915P chipset. This chipset is known for its stability and performance, providing an excellent platform for high-speed computing. The motherboard supports dual-channel DDR2 memory, allowing for increased memory bandwidth which enhances overall system performance. With a total of four DIMM slots, users can install up to 8GB of RAM, facilitating multitasking and demanding applications.

The ASRock 775i915PL-SATA2 boasts ample connectivity options, including support for SATA II, enabling faster data transfer rates of up to 3Gb/s. This is crucial for users who frequently access large files or run storage-intensive applications. Additionally, it offers two SATA connectors, allowing users to set up multiple drives for improved storage solutions. RAID 0 and RAID 1 configurations provide flexibility for users looking to enhance their storage performance or redundancy.

For graphics output, the motherboard features an AGP 8x slot, which is essential for those utilizing older graphics cards. This is particularly beneficial for users who may want to upgrade their graphics components without investing in a new motherboard. The ASRock 775i915PL-SATA2 also includes several PCI slots, accommodating expansion cards for enhanced functionality.

In terms of onboard features, the motherboard is equipped with a Realtek ALC888 audio codec, delivering high-quality sound for gaming and multimedia applications. Onboard LAN allows for easy internet connectivity, while USB 2.0 ports ensure compatibility with a variety of peripherals.

Design-wise, the ASRock 775i915PL-SATA2 is compact and user-friendly, with ample space for cable management and a layout that facilitates easier installation of components. Its balanced design, coupled with an affordable price point, makes it an attractive option for budget-conscious consumers seeking a dependable motherboard.

Overall, the ASRock 775i915PL-SATA2 excels in providing essential features, flexibility, and strong performance, making it a versatile choice for a range of computing needs. Whether for casual use or light gaming, this motherboard remains a valuable component in building a budget-friendly yet capable system.