The Installation Guide of Front USB 3.0 Panel
Step 1
Prepare the bundled Front USB 3.0 Panel, four Step 2 HDD screws, and six chassis screws.
Screw the 2.5” HDD/SSD to the Front USB 3.0 Panel with four HDD screws.
Step 3
Intall the Front USB 3.0 Panel into the 2.5” drive bay of the chassis.
Step 4
Screw the Front USB 3.0 Panel to the drive bay with six chassis screws.
Step 5
Plug the Front USB 3.0 cable into the USB
3.0header (USB3_4_5 or USB3_6_7) on the motherboard.
Step 6
The Front USB 3.0 Panel is ready to use.
The Installation Guide of Rear USB 3.0 Bracket
Step 1
Unscrew the two screws from the Front USB 3.0 Step 2 Panel.
Put the USB 3.0 cable and the rear USB 3.0 bracket together.
Step 3
Screw the two screws into the rear USB 3.0 bracket.
Step 4
Put the rear USB 3.0 bracket into the chassis.
43