ASRock AD2550-ITX manual Advanced Screen, Instant Flash

Page 27

3.3 Advanced Screen

In this section, you may set the configurations for the following items: CPU Configu- ration, Chipset Configuration, Storage Configuration, Super IO Configuration, ACPI Configuration, USB Configuration and Voltage Configuration.

Setting wrong values in this section may cause the system to malfunction.

Instant Flash

Instant Flash is a UEFI flash utility embedded in Flash ROM. This conve- nient UEFI update tool allows you to update system UEFI without entering operating systems first like MS-DOS or Windows®. Just launch this tool and save the new UEFI file to your USB flash drive, floppy disk or hard drive, then you can update your UEFI only in a few clicks without prepar- ing an additional floppy diskette or other complicated flash utility. Please be noted that the USB flash drive or hard drive must use FAT32/16/12 file system. If you execute Instant Flash utility, the utility will show the UEFI files and their respective information. Select the proper UEFI file to update your UEFI, and reboot your system after UEFI update process completes.

27

Image 27
Contents AD2550-ITX Disclaimer Copyright NoticeContents Software Support Introduction Package ContentsSpecifications Hardware ConnectorBios Feature Support CDPage ASRock APP Charger Unique FeaturesASRock Instant Boot ASRock Instant FlashASRock On/Off Play Technology ASRock XFast USBASRock XFast LAN ASRock XFast RAM17.0cm 6.7 Motherboard LayoutI/O Panel LAN Port LED IndicationsTable for Audio Output Connection Screw Holes Pre-installation PrecautionsInstalling a SO-DIMM Installation of Memory Modules SO-DIMMExpansion Slot PCI Slot Installing an expansion cardDual Monitor Feature Hdcp Function What is HDCP?Jumper Setting Jumpers SetupOnboard Headers and Connectors Infrared Module Header Chassis Speaker Header Please connect the chassis Serial port module Hot Plug Function for Sata / Sataii HDDs What is Hot Plug Function?Install Windows 7 OS on your system Driver Installation GuideInstalling Windows 7 on Sata / Sataii HDDs Using Sata / Sataii HDDs with NCQ function Set up UefiUefi Menu Bar IntroductionF10 Navigation KeysMain Screen Navigation KeysInstant Flash Advanced ScreenCPU Configuration Intel Hyper Threading TechnologyNo-Excute Memory Protection Chipset Configuration SATA2 Mode Storage ConfigurationSuper IO Configuration Acpi Configuration Legacy USB Support USB ConfigurationUSB 2.0 Controller USB 3.0 Controller+1.5V Voltage Voltage ConfigurationDram Voltage +1.05V VoltageCPU Fan Setting Chassis Fan 1 SettingHardware Health Event Monitoring Screen Boot Screen Security Screen Exit Screen Drivers Menu Install Operating SystemSupport CD Information Running The Support CD