ASRock AD2550B-ITX Front Panel Audio Header, System Panel Header, Several system front panel

Page 16

Front Panel Audio Header

GND

 

PRESENCE#

(9-pin HD_AUDIO1)

MIC_RET

OUT_RET

 

(see p.2 No. 17)

1

OUT2_L

J_SENSE

OUT2_R

MIC2_R MIC2_L

This is an interface for front panel audio cable that allows convenient connection and control of audio devices.

1.High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system.

2.If you use AC’97 audio panel, please install it to the front panel audio header as below:

A.Connect Mic_IN (MIC) to MIC2_L.

B.Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.

C.Connect Ground (GND) to Ground (GND).

D.MIC_RET and OUT_RET are for HD audio panel only. You don’t need to connect them for AC’97 audio panel.

System Panel Header

This header accommodates

(9-pin PANEL1)

several system front panel

(see p.2 No. 9)

functions.

English

16

Connect the power switch, reset switch and system status indicator on the chassis to this header according to the pin assignments below. Note the positive and negative pins before connecting the cables.

PWRBTN (Power Switch):

Connect to the power switch on the chassis front panel. You may configure the way to turn off your system using the power switch.

RESET (Reset Switch):

Connect to the reset switch on the chassis front panel. Press the reset switch to restart the computer if the computer freezes and fails to perform a normal restart.

PLED (System Power LED):

Connect to the power status indicator on the chassis front panel. The LED is on when the system is operating. The LED keeps blinking when the sys- tem is in S1 sleep state. The LED is off when the system is in S3/S4 sleep state or powered off (S5).

HDLED (Hard Drive Activity LED):

Connect to the hard drive activity LED on the chassis front panel. The LED is on when the hard drive is reading or writing data.

ASRock AD2550B-ITX Motherboard

Image 16
Contents Disclaimer Copyright NoticeEnglish Motherboard Layout 17.0cm 6.7Panel LAN Port LED IndicationsOff No Link Blinking LinkPackage Contents IntroductionSpecifications Bios Feature Unique FeatureSupport CD HardwareEnglish English Pre-installation Precautions InstallationScrew Holes English Installation of Memory Modules SO-DIMM Installing a SO-DIMMInstalling an expansion card Expansion Slot PCI SlotASRock Smart Remote Installation Guide Install Multi-Angle CIR Receiver to the front USB portMake sure the option CIR Controller is setting at Enabled Advanced Super IO Configuration CIR Controller EnabledCIR sensors in different angles Jumpers Setup Jumper SettingClear Cmos Pin jumperOnboard Headers and Connectors Front Panel Audio Header System Panel HeaderSeveral system front panel FunctionsChassis Fan Connector Please connect the fan cable To the fan connectorMatch the black wire to CPU Fan ConnectorDriver Installation Guide Installing Windows 7 on Sata / Sataii HDDsUsing Sata / Sataii HDDs with NCQ function Set up Uefi Install Windows 7 OS on your systemBios Information Software Support CD informationKartoninhalt EinführungDeutsch Spezifikationen CD d’assistance EinzigartigeEigenschaft Zertifizierungen FCC, CE, WhqlVorsicht Deutsch Deutsch Jumper Einstellun Einstellung der JumperCmos löschen Integrierte Header und Anschlüsse Seriell-ATAII-AnschlüsseSerial ATA- Sata Datenkabel USB 2.0-HeaderAnschluss für Audio auf Der GehäusevorderseiteSystem Panel-Header Mehrere Funktion derStromversorgung mit diesem Verbinden Sie die ATXHeader BIOS-Information Contenu du paquet FrançaisFrançais Spécifications Surveillance UniqueSystème Français Français Français Réglage des cavaliers Le cavalier DescriptionEffacer la Cmos Le cavalier à 2 brochesEn-têtes et Connecteurs sur Carte Connecteur audio panneau En-tête du panneau système Cet en-tête permet d’utiliserPlusieurs fonctions du Panneau système frontalEn-tête du haut-parleur Veuillez connecter le De châssis Cet en-têteConnecteur pour châssis Branchez les câbles du Le fil noir à la broche de terreInformations sur le Bios Informations sur le CD de support Contenuto della confezione ItalianoSpecifiche CD di SupportoCaratteristica SpecialeAvviso Attenzione Italiano Setup dei Jumpers Jumper Settaggio del Jumper Resettare la CmosCollettori e Connettori su Scheda Connettore audio sul Pannello frontaleCollettore pannello di sistema Diverse funzioni di sistemaCollettore casse telaio Collegare le casse del telaio a Questo collettoreCorrispondenti connettori Collegare il cavo della ventolinaInformazioni sul Bios Software di supporto e informazioni su Contenido de la caja IntroducciónEspañol Español Especificación CD de soport CaracterísticaÚnica CertificacionesAdvertencia Atención Español Jumper de 2 pins Setup de JumpersLimpiar Cmos Cabezales y Conectores en Placas Conector de audio de Panel frontalCabezal de panel de sistema Este cabezar acomoda varias Dunciones de panel frontal deCabezal del altavoz del chasis Su cabezalConectores de ventilador de chasis De la CPU a este conector yBios Información Información de Software Support CD Введение Платформа ПроцессорНабор микросхем ПамятьКомпакт ДискПоддержки УникальнаяВнимание Осторожно Русский Установка перемычек Перемычка Установка ОписаниеКолодки и разъемы на плате Reset кнопка сброса Pwrbtn кнопка питанияPled индикатор питания системы Hdled индикатор активности жесткого дискаИнформация о Bios Este pacote contém IntroduçãoPortuguês Especificações Português CD de suporte FuncionalidadeMonitor do HW SistemaAviso Aviso Português JumperConfiguração Configuração dos JumpersRestaurar Cmos Conector ConectoresDescrição Conector Áudio do painel FrontalConector do painel do sistema Funções do painel frontal doNeste conector Preto com o pino de aterramenConector do ventilador da Conector de força do ATXInformações da Bios Informações do CD de Suporte Giriş TürkçeYonga seti BellekGenişletme Yuvası GrafiklerBios Özelliği Destek CD’siBenzersiz ÖzellikUyari Dİkkat Türkçe CMOS’u temizleme JumperKapatmak için 5 saniye kadar bir jumper kapağı kullanın Veri Kablosu Da Sata / Sataii sabit Diskine veya anakarttakiSataii konektörüne BağlanabilirSistem Paneli Fişi Ön Panel Ses FişiIşlevini barındırır Kasa Hoparlörü Fişi BağlayınKasa Fan Konektörü Lütfen kasa fan kablolarını Fanına bu konektöre bağlayınBios Bilgileri Yazılım Destek CD’si bilgileri 제품소개 패키지 내용Intel Dual-Core AtomTM 프로세서 D2550 1.86 GHz 플랫폼 Mini-ITX 폼 팩터 6.7 x 6.7, 17.0 x 17.0 cm CPU 전원용 솔리드 콘덴서사우스 브릿지 Intel NM10 Express GUI 지원을 제공하는 AMI Uefi 적합형 Bios Smbios 2.3.1 지원플러그 앤 플레이 지원 Acpi 1.1 웨이크 업 이벤트와의 호환100 101 점퍼 셋팅 102103 104 콘넥터는 오디오 장치를 편리하게 조절하고 연결할 수 있는 전면 오디오 인터페이스 입니다시스템 콘넥터 널기능을 지원하기 위한105 새시 스피커 헤더연결하십시오 섀시 팬 커넥터시스템 바이오스 정보 소프트웨어 지원 CD 정보 106107 I/O パネルシールド108 109 オーバークロック(BIOS 設定の調整、アンタイド・オーバークロック・テクノロ 110111 ASRock XFast RAM を使って Windows が使用できないメモリを利用す ることができます。ASRock XFast RAM は、ASRock Extreme Tuning Utility Axtu 112ジャンパ設定 113オンボードのヘッダとコネクタ類 114115 シャーシに付いている電源スイッチ、リセットスイッチ、システムステータ116 Hdled ハードドライブアクティビティ LED.ソフトウェア サポート CD 情報 117主板簡介 118119 120 警告! 121122 123 清除 Cmos124 Serial Ataii 接口USB 2.0 擴展接頭 連接 SATA/SATAII 硬125 板功能。CPU 風扇接頭 126ATX 電源接頭 Bios 信息 127電子信息產品污染控制標示 128主機板簡介 129130 131 132 133 134 135 USB 2.0 擴充接頭136 可以方便連接音效設備。Bios 訊息 137本主板支援各種微軟 Windows 操作系統:Microsoft Windows 7 32 位元。主板附 Pin ATX 電源安裝說明Penjelasan Isi Paket138 Papan Induk AD2550B-ITXASRockSpesifikasi 139140
Related manuals
Manual 39 pages 18 Kb

AD2550B-ITX specifications

The ASRock AD2550B-ITX is a compact yet powerful mini-ITX motherboard intended for a variety of applications, particularly in home theater PCs (HTPCs), embedded systems, and compact computing setups. Built around the Intel Atom dual-core processor, the AD2550B-ITX showcases a balance of performance and energy efficiency, making it an excellent choice for energy-conscious users.

One of the standout features of the AD2550B-ITX is its support for the Intel Atom D2550 CPU, which operates at a base frequency of 1.86 GHz. This processor is built on a 32nm manufacturing process, which not only enhances performance but also reduces power consumption. The board supports 2 DDR3 SO-DIMM slots that accommodate up to 8 GB of RAM, allowing for efficient multitasking and processing capabilities, all while maintaining a low thermal footprint.

In terms of connectivity, the ASRock AD2550B-ITX is equipped with two USB 3.0 ports and four USB 2.0 ports, providing support for modern peripherals and ensuring speedy data transfers. The integrated HDMI and VGA outputs allow for versatile video output options, ideal for connecting to various display devices. The board also features a Gigabit Ethernet port, which offers high-speed internet access for online streaming and browsing.

On the storage front, the AD2550B-ITX provides several options with support for SATA3 and SATA2 interfaces, enabling the connection of SSDs and HDDs for storage expansion. Additionally, the motherboard includes an mSATA slot for ultra-fast storage solutions, which can significantly enhance the overall system performance.

The ASRock AD2550B-ITX incorporates advanced technologies, such as ASRock's Instant Boot and Instant Flash, which enhance the user experience through quicker boot times and easy BIOS updates, respectively. The board also features a half-size PCIe slot for additional expansion cards, allowing users to customize their setups according to specific needs.

In summary, the ASRock AD2550B-ITX is a robust mini-ITX motherboard that combines efficiency, versatility, and performance in a small form factor. Whether for home media applications, lightweight computing tasks, or embedded projects, the AD2550B-ITX is designed to meet the demands of various users while keeping power consumption to a minimum. Its array of features and connectivity options make it a compelling choice in the mini-ITX market.