ASRock A75M manual Storage Configuration, Sata Controller, Sata Mode, Sata IDE Combined Mode

Page 46

3.4.4 Storage Configuration

SATA Controller

Use this item to enable or disable the “SATA Controller” feature.

SATA Mode

Use this item to adjust SATA Mode. The default value of this option is [IDE Mode]. Configuration options: [AHCI Mode], [RAID Mode] and [IDE Mode].

If you set this item to RAID mode, it is suggested to install

SATA ODD driver on SATA_5 and eSATA3 ports.

SATA IDE Combined Mode

This item is for SATA_5 and eSATA3 ports. Use this item to enable or dis- able SATA IDE combined mode. The default value is [Enabled].

If you want to build RAID on SATA_5 and eSATA3 ports, please disable this item.

Hard Disk S.M.A.R.T.

Use this item to enable or disable the S.M.A.R.T. (Self-Monitoring, Analy- sis, and Reporting Technology) feature. Configuration options: [Disabled], [Auto], [Enabled].

46

Image 46

Contents A75M Copyright Notice DisclaimerContents Uefi Setup Utility Package Contents IntroductionSpecifications Rear Panel I/O ConnectorBios Feature USBHardware Unique FeatureSupport CD MonitorPage Page Page Motherboard Layout ATXPWR1LAN Port LED Indications I/O PanelTable for Audio Output Connection Page Installation Pre-installation PrecautionsCPU Installation Installation of CPU Fan and HeatsinkInstallation of Memory Modules Dimm Installing a DimmExpansion Slots PCI and PCI Express Slots Installing an expansion cardPcie Slots Enjoy the benefit of AMD Dual Graphics AMD Dual Graphics Operation GuideWhat does an AMD Dual Graphics system include? AMD Vision Engine Control Center Dual Monitor and Surround Display Features Dual Monitor FeatureSurround Display Feature For Windows XP / XP 64-bit OSFor Windows 7 / 7 64-bit / VistaTM / VistaTM 64-bit OS What is HDCP?Hdcp Function ASRock Smart Remote Installation Guide CIR sensors in different anglesJumpers Setup DescriptionOnboard Headers and Connectors Serial ATA3 ConnectorsInfrared Module Header CPU Fan Connectors Reset Reset SwitchATX Power Connector ATX 12V Power ConnectorWhat is Hot Swap Function? Serial ATA3 SATA3 Hard Disks InstallationWhat is Hot Plug Function? Hot Plug and Hot Swap Functions for SATA3 HDDsSATA3 HDD Hot Plug Feature and Operation Guide Points of attention, before you process the Hot PlugHow to Hot Plug a SATA3 HDD Installing Windows XP / XP 64-bit With RAID Functions Driver Installation GuideSet up Uefi Use RAID Installation Guide to set RAID configuration \ RAID Installation Guide Make a SATA3 Driver DisketteInstalling Windows XP / XP 64-bit Without RAID Functions Page Uefi Menu Bar To jump to the Exit Screen or exit the current screen Navigation KeysMain Screen System Time HourMinuteSecondOC Tweaker Screen Command Rate CR Dram Timing Control Power Down EnableRAS# to CAS# Delay tRCD Write Recovery Time tWRWould you like to save current setting user defaults? RAS to RAS Delay tRRDWrite to Read Delay tWTR Refresh Cyle Time tRFCAdvanced Screen Instant FlashPackage C6 Mode CPU ConfigurationCore C6 Mode Cool ‘n’ QuietShare Memory North Bridge ConfigurationPrimary Graphics Adapter Onboard Hdmi HD AudioSouth Bridge Configuration Sata IDE Combined Mode Storage ConfigurationSata Mode Sata ControllerSuper IO Configuration Acpi Configuration Acpi Hpet table USB 3.0 Controller USB ConfigurationUSB 2.0 Controller Legacy USB SupportChassis Fan 1 Setting CPU Fan 1 SettingHardware Health Event Monitoring Screen Boot Screen Security Screen Exit Screen Running The Support CD Install Operating SystemSupport CD Information Drivers MenuInstalling OS on a HDD Larger Than 2TB