ASRock A75 Extreme6 manual Expansion Slots PCI and PCI Express Slots, Installing an expansion card

Page 19

2.4 Expansion Slots (PCI and PCI Express Slots)

There are 3 PCI slots and 4 PCI Express slots on this motherboard.

PCI Slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface.

PCIE Slots:

PCIE1 (PCIE x1 slot; White) is used for PCI Express cards with x1 lane width cards, such as Gigabit LAN card and SATA2 card.

PCIE2 / PCIE3 (PCIE x16 slot; Blue) is used for PCI Express x16 lane width graphics cards, or used to install PCI Express graphics cards to support CrossFireXTM function.

PCIE4 (PCIE x16 slot; Blue) is used for PCI Express x4 lane width cards, or used to install PCI Express graphics cards to support 3-Way CrossFireXTM function.

1.In single VGA card mode, it is recommended to install a PCI Ex- press x16 graphics card on PCIE2 slot.

2.In CrossFireXTM mode, please install PCI Express x16 graphics cards on PCIE2 and PCIE3 slots. Therefore, both these two slots will work at x8 bandwidth.

3.In 3-Way CrossFireXTM mode, please install PCI Express x16 graphics cards on PCIE2, PCIE3 and PCIE4 slots. Therefore, PCIE2 and PCIE3 slots will work at x8 bandwidth while PCIE4 slot will work at x4 bandwidth.

4.Please connect a chassis fan to motherboard chassis fan connec- tor (CHA_FAN1, CHA_FAN2 or CHA_FAN3) when using multiple graphics cards for better thermal environment.

Installing an expansion card

Step 1. Before installing the expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.

Step 2. Remove the system unit cover (if your motherboard is already installed in a chassis).

Step 3. Remove the bracket facing the slot that you intend to use. Keep the screws for later use.

Step 4. Align the card connector with the slot and press firmly until the card is completely seated on the slot.

Step 5. Fasten the card to the chassis with screws.

Step 6. Replace the system cover.

19

Image 19
Contents A75 Extreme6 Disclaimer Copyright NoticeContents Uefi Setup Utility Introduction Package ContentsSpecifications USB ConnectorAudio Rear Panel I/OSupport CD Smart SwitchBios Feature Unique FeatureFCC, CE, Whql CertificationsPage Page 24.4cm 9.6-in Motherboard LayoutLAN Port LED Indications I/O PanelTable for Audio Output Connection Page Pre-installation Precautions InstallationInstallation of CPU Fan and Heatsink CPU InstallationDual Channel Memory Configurations Installation of Memory Modules DimmInstalling a Dimm Expansion Slots PCI and PCI Express Slots Installing an expansion cardPcie Slots Page CrossFire Bridge Installing Three CrossFireXTM-Ready Graphics Cards CrossFireTM Bridge For Windows XP OS Driver Installation and SetupFor Windows 7 / VistaTM OS Page Enjoy the benefit of AMD Dual Graphics AMD Dual Graphics Operation GuideWhat does an AMD Dual Graphics system include? AMD Vision Engine Control Center Dual Monitor Feature Dual Monitor and Surround Display FeaturesFor Windows XP / XP 64-bit OS Surround Display FeatureFor Windows 7 / 7 64-bit / VistaTM / VistaTM 64-bit OS What is HDCP?Hdcp Function CIR sensors in different angles ASRock Smart Remote Installation GuideDescription Jumpers SetupSerial ATA3 Connectors Onboard Headers and ConnectorsUSB 2.0 Headers Besides two default USB System Panel Header CPU Fan Connectors ATX 12V Power Connector Supply to this connectorHdmispdif Header Hdmispdif header, providing Smart Switches Status Code Description 12 Dr. DebugPage Page Page Hot Plug and Hot Swap Functions for SATA3 HDDs Serial ATA3 SATA3 Hard Disks InstallationWhat is Hot Plug Function? What is Hot Swap Function?Points of attention, before you process the Hot Plug SATA3 HDD Hot Plug Feature and Operation GuideHow to Hot Plug a SATA3 HDD Installing Windows XP / XP 64-bit With RAID Functions Driver Installation GuideSet up Uefi \ RAID Installation Guide Make a SATA3 Driver Diskette Use RAID Installation Guide to set RAID configurationInstalling Windows XP / XP 64-bit Without RAID Functions Page Uefi Menu Bar IntroductionSystem Time HourMinuteSecond Navigation KeysMain Screen To jump to the Exit Screen or exit the current screenOC Tweaker Screen CPU Voltage Dram Configuration Dram FrequencyDram Timing Control Power Down Enable RAS# to CAS# Delay tRCDWrite to Read Delay tWTR Command Rate CRWrite Recovery Time tWR RAS to RAS Delay tRRDInstant Flash Advanced ScreenCool ‘n’ Quiet CPU ConfigurationCore C6 Mode Package C6 ModeNorth Bridge Configuration South Bridge Configuration Storage Configuration Infrared Port Super IO ConfigurationSerial Port Serial Port AddressAcpi Configuration Acpi Hpet table Legacy USB Support USB ConfigurationUSB 2.0 Controller USB 3.0 ControllerChassis Fan 3 Setting CPU Fan 1 & 2 SettingChassis Fan 1 Setting Chassis Fan 2 SettingBoot Screen Security Screen Exit Screen Drivers Menu Install Operating SystemSupport CD Information Running The Support CDInstalling OS on a HDD Larger Than 2TB
Related manuals
Manual 286 pages 25.99 Kb

A75 Extreme6 specifications

The ASRock A75 Extreme6 is a high-performance motherboard designed for AMD’s A-series processors, utilizing the FM1 socket. This motherboard exemplifies ASRock's commitment to delivering reliable, feature-rich, and user-friendly products. Built on the AMD A75 chipset, the A75 Extreme6 is a great choice for both gamers and professionals who seek a robust platform for their computing needs.

One of the standout features of the A75 Extreme6 is its support for Multi-GPU configurations. It supports both CrossFireX and Dual Graphics technologies, allowing users to pair compatible AMD graphics cards for enhanced graphics performance. This makes it an excellent choice for gamers looking to achieve high frame rates and detailed graphical fidelity in their favorite titles.

The motherboard comes with four DIMM slots supporting up to 32GB of DDR3 memory. Users can take advantage of dual-channel memory configurations with speeds of up to 2400 MHz when overclocking. This allows for improved multitasking and speed, essential for demanding applications such as video editing, gaming, and 3D rendering.

Storage options on the A75 Extreme6 are also impressive, featuring six SATA III ports that allow for data transfer rates up to 6 Gbps. Additionally, the motherboard supports RAID configurations, including RAID 0, 1, and 10, providing users with flexibility in data management and redundancy. For high-speed storage, there is an onboard mSATA slot that can be utilized for SSD caching, effectively boosting system responsiveness.

In terms of connectivity, the ASRock A75 Extreme6 offers a plethora of options. There are multiple USB 3.0 ports, including both front and rear I/O options, providing fast data transfer rates for compatible devices. The onboard networking capabilities feature a Gigabit Ethernet port, ensuring a speedy and stable internet connection.

Moreover, the A75 Extreme6 is equipped with high-definition audio support through its Realtek ALC898 codec, delivering immersive audio experiences for gaming and media consumption. With 7.1 channel audio support, users can connect their speakers or headphones and enjoy a quality sound experience.

The motherboard also incorporates ASRock's proprietary technologies, such as Instant Boot and Instant Flash, making system configurations and updates straightforward and efficient. The comprehensive BIOS setup allows users to delve into advanced settings and achieve optimal performance.

Overall, the ASRock A75 Extreme6 motherboard stands out for its feature-rich design, excellent expandability, and robust performance capabilities. It is indeed a solid choice for those looking to build a powerful and versatile PC.