oLoosen the cable clamp.
oFeed the mains connection cable through the grommet in the back panel and cable clamp. Connect the mains supply cable to the terminal block on the cooker using the colour code on the previous page.
oSecure the cable clamp. Check the cable terminals for tightness and ensure that the terminal links are in place, then replace the cover plate and cover screw.
Gas connection
This appliance must be installed by a competent person in accordance with the current versions of the following UK (United Kingdom) or ROI (Republic of Ireland) Regulations and Safety Standards or their European Norm Replacements.
Important information
oThis cooker is supplied to run on natural gas only and cannot be used on any other type of gas without modification.
oConversion for use on LPG and other gases must only be undertaken by a qualified person. For information on the use of other gases, please contact the Baumatic Technical Department.
oThe cooker must be installed by a qualified person, in accordance with the current edition of the Gas Safety (Installation and Use) (Amendment) Regulations and the relevant building/I.E.E. Regulations.
oFailure to install the appliance correctly could invalidate Baumatic’s guarantee and lead to prosecution under the regulations quoted above.
oIn the UK, GASSAFE registered installers are authorised to undertake the installation and service work, in compliance with the above regulations.
31