How to start your modem

Insert SIM card Into modem

Note:

Plug into computer

Follow onscreen Installation SW

Ready! Let’s GO!!!

You can get detail installation guide information in User Manual (PDF version). Once software has been installed, the USB-Modem will start automatically. If installation “auto-run” does not begin, you will need to Double-Click the “My Connection” icon in device path of “My Computer” to run the installation manually.

LED Indicates

(Following table are listed the LED Indicates for each status.)

LED Indicator	Description

Flashing Green & Red multicolor circularly	Network Searching
Quickly Flashing Green & Red multicolor circularly	Out of order

Green Light Slow Flashing	Registering into 3G network

Constant Green Light	Registered to 3G network

Red Light Slow Flashing	Registering into 2G network

Constant Red Light	Registered to 2G network

Safety and Use

We recommend that you read this chapter carefully before using the USB-Modem. The manufacturer disclaims any liability for damage, which may result as a consequence of improper use of the USB-Modem or of use contrary to the instructions contained herein.

Traffic Safety

When driving, do not use the USB-Modem

When switched on, the USB-Modem emits electromagnetic waves that can interfere with the vehicle’s electronic systems such as ABS anti-lock brakes or airbags. To ensure that there is no problem, do not place the USB-Modem on top of the dashboard or within an airbag deployment area.

Check with your car dealer or the car manufacturer to make sure that the dashboard is adequately shielded from modem RF energy.