Alcatel ID702WTA Using microSD Card, Getting Started, Remove microSD Card, Charge the device

U-Disk

Insert your U-disk to the transfer box, → insert the transfer box into the Tablet. When ready for use, it’s OK.

☆Don’t insert and remove the U-disk repeatedly in a short time, as this may cause damage to the U-disk.

The transfer box is also used for Ethernet network connections.

5 Using microSD Card

☆The device supports a maximum 32GB microSD card.

Insert your card into the microSD slot until it clicks into place. it’s OK

Remove microSD Card

Use one of the following methods for moving the microSD card.

Close all applications or documents which have been opened on the card. Tap → Settings → SD card & device storage → Unmount SD card. Press the card lightly; it is partially ejected allowing you to pull the card out.

☆Don’t insert and remove the U-disk repeatedly in a short time, as this may cause damage to the card.

☆We recommend using major brands of memory cards to avoid incompatibility.

6 Getting Started

Charge the device

☆You cannot charge the battery using the USB cable.

☆You can use the device while the battery is charging, although the charging time is

longer when operating and charging at the same time.

Plug the power adapter into an electrical wall outlet, and then connect to the device to fully charge the battery before use (approx. 4hour).

While charging, the battery indicator light is red. When fully charged, the battery indicator light is green.

Turn the device on

Press the power button and hold for 2 seconds.

5