Getting started, Set-up, Charging the battery

1.2Getting started

1.2.1Set-up

Removing or installing the back cover

Inserting or removing the SIM card

You must insert your SIM card to make phone calls. Please power off your phone before inserting or removing the SIM card.

Place the SIM card with the chip facing downwards and slide it into its housing. Make sure that it is correctly inserted. To remove the card, press and slide it out.

Installing or removing the battery

Please power off your phone before removing the battery.

•Insert and click the battery into place, then close the cover.

•Unclip the cover, then remove the battery.

Installing the microSD card

To install, please open microSD card lock first, and then place the external microSD card into the slot with the gold contact facing down. To remove the external microSD card, please open microSD card lock and take it out from the slot.

Charging the battery

Connect the battery charger to your phone and mains socket respectively.

The charging status bar will not float if your battery is extendly consumed. To reduce power consumption and energy waste, when battery is fully charged, disconnect your charger from the plug; switch off Wi-Fi, GPS, Bluetooth or background-running applications when not in use; reduce the backlight time, etc.

IP4705_4033X_QG_Eng_GB_19_130725.indd 5-6

2013-7-25 5:56:00