Profile management, Network, PIN management

4.2 Profile management

Add a new profile:

1, Click <New>.

2, Input the correct parameters you get from the operator.

Note: Profile Name/Number/APN is the mandatory to be filled. 3, Click <Save>.

Edit a profile:

1, Select the profile from the connection profile list. 2, Change the parameters.

3, Click <Save>.

Delete a profile:

1, Select the profile from the connection profile list. 2, Click <Delete>.

3, On the pop up dialog ”are you sure to delete this profile?”,click <OK>. Note: the default profile can not be deleted.

Set as default:

1, Select the profile from the connection profile list. 2, Click <Set default>.

3, On the pop up dialog ”are you sure to set this profile as default?”, click <OK>. Note: Once set the profile as default,(D) will be added as a mark.

4.3 Network

Network Mode:Automatic/4G only/3G only/2G only, default is automatic.

Network Selection: Automatic/Manual, default is automatic.

Select a Network Manually

1,Choose Manual in the network selection. 2,Click <Apply>.

3,Click <Refresh> to list the available network. 4,Choose the network and Click <Select> to register.

Note: For the Services,LTE,UMTS,GSM.For the Status, Active( the network registered), Available( the network can be used).

4.4 PIN management

Enable PIN

1, When PIN is disable, click <Enable>, PIN input page is displayed.