2.6 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard!
LVDS Panel Connector
| 1 | 39 |
(see p.8, No. 1) |
|
|
| 2 | 40 |
PIN | Signal Name | PIN | Signal Name |
2 | R_LVDD | 1 | R_LVDD |
4 | LDDC_CLK | 3 | +3V |
6 | LVDS_A_DATA0# | 5 | LDDC_DATA |
8 | GND | 7 | LVDS_A_DATA0 |
10 | LVDS_A_DATA1 | 9 | LVDS_A_DATA1# |
12 | LVDS_A_DATA2# | 11 | GND |
14 | GND | 13 | LVDS_A_DATA2 |
16 | LVDS_A_DATA3 | 15 | LVDS_A_DATA3# |
18 | LVDS_A_CLK# | 17 | GND |
20 | GND | 19 | LVDS_A_CLK |
22 | LVDS_B_DATA0 | 21 | LVDS_B_DATA0# |
24 | LVDS_B_DATA1# | 23 | GND |
26 | GND | 25 | LVDS_B_DATA1 |
28 | LVDS_B_DATA2 | 27 | LVDS_B_DATA2# |
30 | LVDS_B_DATA3# | 29 | DPLVDD_EN |
32 | GND | 31 | LVDS_B_DATA3 |
34 | LVDS_B_CLK | 33 | LVDS_B_CLK# |
36 | CON_LBKLT_EN_R | 35 | GND |
38 | LCD_BLT_VCC | 37 | CON_LBKLT_CTL_R |
40 | LCD_BLT_VCC | 39 | LCD_BLT_VCC |
Inverter Power Control Wafer
(see p.8, No. 4)
1
PIN | Signal Name |
1 | GND |
2 | GND |
3 | CON_LBKLT_CTL |
4 | CON_LBKLT_EN |
5 | LCD_BLT_VCC |
6 | LCD_BLT_VCC |
Backlight & Amp Volume Control
(see p.8, No. 5)
| PIN | Signal Name | |
| 1 | GPIO_VOL_UP | |
1 | 2 | GPIO_VOL_DW | |
3 | PWRDN | ||
| |||
| 4 | GPIO_BLT_UP | |
| 5 | GPIO_BLT_DW | |
| 6 | GND | |
| 7 | GND |
17