ASRock IMB-146 Series manual Chipset Configuration

Page 38

3.3.3 Chipset Configuration

Spread spectrum for Clockgen

Enable or disable the Spread spectrum for Clockgen.

Panel Type Selection

Use this to select a panel type.

Display Boot Type

Use this to select the video device which will be activated during POST.

ACPI HPET Table

Use this to enable or disable the ACPI HPET Table.

Restore on AC/Power Loss

This allows you to set the power state after an unexpected AC/ power loss. If [Power Off] is selected, the AC/power remains off when the power recovers. If [Power On] is selected, the AC/power resumes and the system starts to boot up when the power recov- ers.

Onboard HD Audio

Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio.

Onboard LAN

This allows you to enable or disable the Onboard LAN.

38

Image 38
Contents IMB-146 Copyright Notice DisclaimerContents Uefi Setup Utility Package Contents IntroductionSpecifications PlatformBios ASRock Instant Flash Unique FeaturesASRock Crashless Bios Motherboard Layout PCIE1CPU Fan Connector CPUFAN1 Pin ATX 12V Power ConnectorDVI Connector DVI1 Sata Power Connector SATAPWR1I/O Panel LAN Port LED IndicationsInstallation Pre-installation PrecautionsInstalling Memory Modules Dimm Installing an Expansion Card Expansion Slots PCI Express SlotsInstalling Serial Sata / SATA2 Hard Disks Power Connectors Reset Reset Switch Installing the System PanelPwrbtn Power Switch Pled System Power LEDOnboard Headers and Connectors USB 2.0 HeadersLout L Lvds Connector DVI Connector PWR LEDLVDS2 EN Jumpers Setup Lvds VDD PWRCOM Power Setting Jumpers Using Ahci Mode Set Up Uefi Operating System SetupInstalling Windows 7 without RAID Install Windows 7 on your system Using IDE Mode Set Up UefiDrivers Menu Installing DriversRunning The Support CD Utilities MenuDual Monitor Dual MonitorHot Plug Operation Guide What is Hot Plug?Hot Plug for Hard Disk Drives Points for attention, before you process Hot Plug How to Hot Plug an HDD StepHow to Hot Unplug an HDD Introduction Uefi Menu BarNavigation Keys Main Screen Advanced Screen Instant FlashNo-Execute Memory Protection CPU ConfigurationHyper-Threading Super IO Configuration Chipset Configuration Hard Disk S.M.A.R.T Storage ConfigurationOnboard Sataii Mode Acpi Configuration USB Mouse Power On Legacy USB Support USB ConfigurationUSB 2.0 Controller CPU FAN1 Setting Hardware Health Event Monitoring ScreenBootup Num-Lock Boot ScreenSetup Prompt Timeout Boot From Onboard LANSecurity Screen Exit Screen
Related manuals
Manual 2 pages 9.35 Kb