ASRock H77 Pro4/MVP manual Points of attention, before you process the Hot Plug

Page 40

2.16 SATA / SATA2 / SATA3 HDD Hot Plug Feature and Operation Guide

This motherboard supports Hot Plug feature for SATA / SATA2 / SATA3 HDD in RAID / AHCI mode. Please read below operation guide of Hot Plug feature carefully. Before you process the SATA / SATA2 / SATA3 HDD Hot Plug, please check below cable accessories from the motherboard gift box pack.

A. 7-pin SATA data cable

B. SATA power cable with SATA 15-pin power connector interface

A. SATA data cable (Red)

B. SATA power cable

 

 

 

 

 

 

 

 

SATA 7-pin connector

Caution

The SATA 15-pin power connector (Black) connect

to SATA / SATA2 / SATA3 HDD

1x4-pin conventional power connector (White) connect to power supply

1.Without SATA 15-pin power connector interface, the SATA / SATA2 / SATA3 Hot Plug cannot be processed.

2.Even some SATA / SATA2 / SATA3 HDDs provide both SATA 15-pin power connector and IDE 1x4-pin conventional power connector interfaces, the IDE

1x4-pin conventional power connector interface is definitely not able to support

Hot Plug and will cause the HDD damage and data loss.

Points of attention, before you process the Hot Plug:

1.Below operation procedure is designed only for our motherboard, which supports SATA / SATA2 / SATA3 HDD Hot Plug.

*The SATA / SATA2 / SATA3 Hot Plug feature might not be supported by the chipset because of its limitation, the SATA / SATA2 / SATA3 Hot Plug support information of our motherboard is indicated in the product spec on our website: www.asrock.com

2.Make sure your SATA / SATA2 / SATA3 HDD can support Hot Plug function from your dealer or HDD user manual. The SATA / SATA2 / SATA3 HDD, which cannot support Hot Plug function, will be damaged under the Hot Plug operation.

3.Please make sure the SATA / SATA2 / SATA3 driver is installed into system properly. The latest SATA / SATA2 / SATA3 driver is available on our support website: www.asrock.com

4.Make sure to use the SATA power cable & data cable, which are from our motherboard package.

5.Please follow below instructions step by step to reduce the risk of HDD crash or data loss.

40

Page 39 Page 41
Image 40
Page 39 Page 41
Contents H77 Pro4/MVP Copyright Notice DisclaimerContents Uefi Setup Utility Package Contents IntroductionSpecifications Rear Panel I/O AudioUSB3.0 Unique Feature Support CDMonitor HardwareCertifications Page Page Page Motherboard Layout LAN Port LED Indications I/O PanelTable for Audio Output Connection Page Pre-installation Precautions Screw HolesCPU Installation Page Installation of CPU Fan and Heatsink Installation of Memory Modules Dimm Dual Channel Memory ConfigurationInstalling a Dimm Installing an expansion card Expansion Slots PCI and PCI Express SlotsInstalling Two CrossFireXTM-Ready Graphics Cards CrossFireXTM and Quad CrossFireXTM Operation GuideCrossFire Bridge For Windows XP OS Driver Installation and SetupFor Windows 7 / VistaTM OS Page Dual Monitor and Surround Display Features Dual Monitor FeatureSurround Display Feature For Windows XP / XP 64-bit OSFor Windows 7 / 7 64-bit / VistaTM / VistaTM 64-bit OS What is HDCP?Hdcp Function ASRock Smart Remote Installation Guide CIR sensors in different anglesJumpers Setup DescriptionOnboard Headers and Connectors USB 3.0 Header Besides two default USB System Panel Header Chassis Speaker Header Please connect the chassis ATX Power Connector ATX 12V Power Connector Please connect an ATXSerial port Header Serial ATA Sata / Serial ATA2 SATA2 Hard Disks Installation Serial ATA3 SATA3 Hard Disks InstallationWhat is Hot Plug Function? What is Hot Swap Function?Hot Plug and Hot Swap Functions for Sata / SATA2 HDDs Hot Plug and Hot Swap Functions for SATA3 HDDsPoints of attention, before you process the Hot Plug How to Hot Plug a Sata / SATA2 / SATA3 HDD Set up Uefi Driver Installation GuideUse RAID Installation Guide to set RAID configuration Installing Windows XP / XP 64-bit Without RAID Functions Install Windows XP / XP 64-bit OS on your systemPage Introduction Uefi Menu BarNavigation Keys Main ScreenNavigation Keys + / Tab Enter Pgup Pgdn Home F10 F12OC Tweaker Screen Short Duration Power Limit Dram Timing Configuration Load XMP SettingLong Duration Maintained Primary Plane Current LimitCommand Rate CR Dram tRPDram tRAS Dram tWRMRC Fast Boot Voltage Configuration CPU Core VoltageUser Defaults CPU Load-Line CalibrationAdvanced Screen Instant FlashCPU Configuration Hardware Prefetcher Intel Virtualization TechnologyAdjacent Cache Line Prefetch North Bridge Configuration South Bridge Configuration IntelR Rapid Start Technology IntelR Rapid Start TechnologyIntelR Smart Connect Technology IntelR Smart Connect TechnologyStorage Configuration Page Super IO Configuration Serial PortSerial Port Address Infrared PortAcpi Configuration USB Configuration USB 2.0 ControllerUSB 3.0 Controller Legacy USB SupportCPU Fan 1 & 2 Setting Chassis Fan 1 SettingChassis Fan 2 Setting Over Temperature ProtectionBoot Screen Security Screen Exit Screen Software Support Installing OS on a HDD Larger Than 2TB in Ahci Mode Installing OS on a HDD Larger Than 2TB in RAID Mode Windows VistaTM 64-bit Page Windows 7 64-bit
Related manuals
Manual 208 pages 38.68 Kb

H77 Pro4/MVP specifications

The ASRock H77 Pro4/MVP motherboard is designed to cater to users seeking a reliable and feature-rich platform for their Intel-based systems. Designed specifically for third-generation Intel Core processors, this motherboard leverages the Intel H77 chipset, enabling seamless performance for both casual users and gamers alike.

One of the most significant features of the ASRock H77 Pro4/MVP is its support for LGA 1155 socket processors. This compatibility ensures that users can take advantage of the powerful features offered by Intel’s Core i7, i5, and i3 CPUs, making it suitable for a variety of computing tasks from everyday tasks to demanding applications. The motherboard supports dual-channel DDR3 memory up to 32GB, with speeds of 2400/2200/2133/1866/1600/1333/1066 MHz, enhancing the overall performance and multitasking capabilities of the system.

Storage options on the ASRock H77 Pro4/MVP are extensive. It features four SATA3 (6Gb/s) ports and two SATA2 (3Gb/s) ports, enabling users to connect multiple hard drives and SSDs to accommodate their storage needs. With support for RAID 0, RAID 1, and RAID 10 configurations, users can enhance data redundancy and performance based on their requirements.

The motherboard is equipped with multiple USB connectivity options, including eight USB 3.0 ports and four USB 2.0 ports. This allows for extensive peripheral connectivity, such as external storage devices, printers, and more. Additionally, the onboard LAN powered by Realtek offers a stable Gigabit Ethernet connection for fast networking and internet access.

The ASRock H77 Pro4/MVP also stands out with its onboard graphics support via Intel HD Graphics. It features HDMI, DVI-D, and VGA outputs, allowing for versatile display options depending on the user's monitor setup. This ensures that even without a dedicated graphics card, users can still enjoy high-definition visuals.

For users concerned with system cooling and efficiency, the motherboard provides several fan headers and supports ASRock's Intelligent Energy Saver technology, which optimizes power consumption. The easy-to-navigate BIOS and user-friendly features enhance the overall user experience, making it easier to tweak settings for optimal performance.

In conclusion, the ASRock H77 Pro4/MVP motherboard is a balanced solution for those looking to build a capable Intel-based PC. It combines high performance, rich connectivity, and ample storage options, making it an excellent choice for everyday computing scenarios, gaming, and everything in between. Whether upgrading or building from scratch, users will find that this motherboard meets their needs with ease and reliability.
Top Page Image Contents