ASRock ION 330HT Sata Configuration, USB Configuration, Onboard Sata Controller, USB 2.0 Support

7.4.4 SATA Configuration

BIOS SETUP UTILITY

Advanced
SATA Configuration			Options
Onboard SATA Controller	[Enabled]	Enabled
		Disabled
SATA Operation Mode	[IDE]
SATAII_1	[ATAPI CDROM]
SATAII_2	[Hard Disk]
SATAII_3	[Not Detected]
ESATA	[Not Detected]
			Select Screen
			Select Item
		+-	Change Option
		F1	General Help
		F9	Load Defaults
		F10	Save and Exit
		ESC	Exit

v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.

Onboard SATA Controller

Use this item to enable or disable the “Onboard SATA Controller” feature.

SATA Operation Mode

Use this item to adjust SATA Operation Mode. The default value of this option is [IDE]. If you want to operate RAID function on SATA / SATAII HDDs, please select [RAID]. Configuration options: [AHCI], [RAID] and [IDE]. Please noted that AHCI and RAID mode are not supported under Windows® XP / XP 64-bit OS.

7.4.5 USB Configuration

	BIOS SETUP UTILITY
Advanced
USB Configuration	To enable or disable
	USB 2.0 support.
USB 2.0 Support	[Enabled]
		Select Screen
		Select Item
	+-	Change Option
	F1	General Help
	F9	Load Defaults
	F10	Save and Exit
	ESC	Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.

USB 2.0 Support

Use this item to enable or disable the USB 2.0 support.

4 3