ASRock DN2800MT manual Super IO Configuration

Page 26

3.3.2 Super IO Configuration

COM1 Configuration

Use this to set parameters of COM1.

COM2 Configuration

Use this to set parameters of COM2.

COM4 Configuration

Use this to set parameters of COM4.

COM5 Configuration

Use this to set parameters of COM5.

COM6 Configuration

Use this to set parameters of COM6.

LPT1 Port Configuration

Use this set parameters of the onboard parallel port.

WDT Timeout Reset

This allows users to enable/disable the Watch Dog Timer timeout to reset system. The default value is [Disabled].

26

Image 26
Contents DN2800MT CALIFORNIA, USA only Contents Software Support Package Contents IntroductionSpecifications MemoryInternal Motherboard Layout Mini-PCIeMSATASEL1 I/O Panel LAN Port LED IndicationsPre-installation Precautions Screw HolesInstallation of Memory Modules SO-DIMM Mini-PCIe/mini-SATA slot Installing an expansion cardMini-PCIe slot Description Jumpers SetupJumper DCCLT1 Onboard Headers and Connectors Lvds Panel ConnectorSPDIF1 System Panel Header PS2KBMS1 DMIC1 Driver Installation Guide Introduction Uefi Menu BarNavigation Keys Navigation KeysMain Screen F10 F12Advanced Screen Instant FlashNo-Excute Memory Protection CPU ConfigurationIntel Hyper Threading Technology Super IO Configuration Chipset Configuration Hard Disk S.M.A.R.T Storage ConfigurationSata Mode Acpi Configuration Legacy USB Support USB ConfigurationUSB 2.0 Controller Voltage Configuration Dram VoltageCase Open Feature CPUFAN1 SettingCHAFAN1 Setting Hardware Health Event Monitoring ScreenBootup Num-Lock Boot ScreenSetup Prompt Timeout Boot From Onboard LANSecurity Screen Exit Screen Running The Support CD Install Operating SystemSupport CD Information Drivers Menu