ASRock H61M-HP4 manual Front Panel Audio Header

Page 24

Front Panel Audio Header

 

 

GND

(9-pin HD_AUDIO1)

 

 

 

 

PRESENCE#

 

 

 

 

 

 

MIC_RET

 

 

 

 

 

 

 

 

 

 

 

OUT_RET

(see p.13 No. 18)

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OUT2_L

 

 

 

 

 

 

 

 

J_SENSE

 

 

 

 

 

 

 

OUT2_R

 

 

 

 

 

MIC2_R

 

 

 

MIC2_L

This is an interface for front panel audio cable that allows convenient connection and control of audio devices.

1.High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system.

2.If you use AC’97 audio panel, please install it to the front panel audio header as below:

A.Connect Mic_IN (MIC) to MIC2_L.

B.Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.

C.Connect Ground (GND) to Ground (GND).

D.MIC_RET and OUT_RET are for HD audio panel only. You don’t need to connect them for AC’97 audio panel.

E.To activate the front mic.

For Windows® XP / XP 64-bit OS:

Select “Mixer”. Select “Recorder”. Then click “FrontMic”.

For Windows® 8 / 8 64-bit / 7 / 7 64-bit / VistaTM / VistaTM 64-bit OS: Go to the "FrontMic" Tab in the Realtek Control panel. Adjust “Recording Volume”.

System Panel Header

This header accommodates

(9-pin PANEL1)

several system front panel

(see p.13 No. 11)

functions.

Connect the power switch, reset switch and system status indicator on the chassis to this header according to the pin assignments below. Note the positive and negative pins before connecting the cables.

PWRBTN (Power Switch):

Connect to the power switch on the chassis front panel. You may configure the way to turn off your system using the power switch.

RESET (Reset Switch):

Connect to the reset switch on the chassis front panel. Press the reset switch to restart the computer if the computer freezes and fails to perform a normal restart.

PLED (System Power LED):

Connect to the power status indicator on the chassis front panel. The LED

24

Image 24
Contents H61M-HP4 Copyright Notice DisclaimerContents Uefi Setup Utility Package Contents IntroductionSpecifications Connector AudioRear Panel I/O StorageBios Feature Support CDHardware MonitorUnique Features ASRock Extreme Tuning Utility AxtuASRock Instant Boot ASRock Instant FlashASRock APP Charger ASRock XFast USBASRock XFast LAN ASRock XFast RAMASRock Crashless Bios ASRock Fast BootASRock OMG Online Management Guard ASRock Internet FlashASRock Restart to Uefi ASRock Combo Cooler Option C.C.OASRock Good Night LED Motherboard Layout RoHSI/O Panel LAN Port LED IndicationsPage Pre-installation Precautions Screw HolesCPU Installation Page Installation of CPU Fan and Heatsink Align fasteners with the motherboard through- holesInstallation of Memory Modules Dimm Installing a DimmInstalling an expansion card Expansion Slots PCI Express SlotsPcie slots Jumpers Setup DescriptionOnboard Headers and Connectors Front Panel Audio Header CPU Fan Connectors Hdled Hard Drive Activity LEDATX Power Connector Please connect an ATX power supply to this connectorPIN Driver Installation Guide Installing Windows XP / XP 64-bit Without RAID FunctionsUsing Sata / SATA2 HDDs with NCQ function Set Up Uefi Install Windows XP / XP 64-bit OS on your system Using Sata / SATA2 HDDs without NCQ function Set up UefiASRock XFast ASRock XFast RAM XFast RAM Settings Page ASRock XFast LAN ASRock XFast LAN UI Overview Arrow down = currentlyNo arrow = off Window settings Close WindowsTraffic Shaping CFos Speed TestAdding a new application and changing its priority ASRock XFast USB ASRock XFast USB UI Overview Introduction Uefi Menu BarNavigation Keys Main ScreenNavigation Keys + / Tab Enter Pgup Pgdn Home F10 F12OC Tweaker Screen Short Duration Power Limit Dram Timing Configuration Load XMP SettingDram Configuration Dram tCL Primary Plane Current LimitCommand Rate CR Dram tRPDram tRAS Dram tWRMRC Fast Boot Voltage Configuration Dram VoltageAdvanced Screen CPU Configuration Intel Virtualization Technology Hardware PrefetcherAdjacent Cache Line Prefetch North Bridge Configuration South Bridge Configuration Storage Configuration Sata Mode SelectionSata Aggressive Link Power Management Sata ControllersIntelR Rapid Start Technology IntelR Rapid Start TechnologyEntry After Active Page Threshold SupportIntelR Smart Connect Technology IntelR Smart Connect TechnologySuper IO Configuration Serial PortPort Address Infrared PortAcpi Configuration USB Configuration USB 2.0 ControllerLegacy USB Support Uefi Update Utility Instant Flash ToolOMGOnline Management Guard Internet FlashNetwork Configuration Internet Setting Dehumidifier CPU Fan SettingWould you like to save current setting user defaults? Uefi Download ServerCPU Fan 1 Setting Chassis Fan 1 SettingCase Open Feature Hardware Health Event Monitoring ScreenBoot Screen Fast BootBoot From Onboard LAN Setup Prompt TimeoutBoot Failure Guard Boot Failure Guard CountFull Screen Logo AddOn ROM DisplaySecure Boot Security ScreenExit Screen Install Operating System Support CD InformationRunning The Support CD Drivers MenuInstalling OS on a HDD Larger Than 2TB
Related manuals
Manual 15 pages 17.84 Kb

H61M-HP4 specifications

The ASRock H61M-HP4 motherboard is a versatile and robust option designed for users looking to build a reliable system without breaking the bank. Catering primarily to Intel's second and third-generation Core processors, this microATX motherboard offers a balance of performance and functionality suitable for both home and office environments.

One of the hallmark features of the H61M-HP4 is its support for Intel's LGA 1155 socket, which allows for a myriad of compatible CPUs ranging from the economical Pentium to the more powerful Core i7 models. This makes it a flexible choice for budget builders and those seeking a high-performance system alike. The motherboard supports dual-channel DDR3 memory, accommodating up to 16GB with speeds reaching 1600 MHz. This enhances the overall system performance, particularly for multitasking applications.

On the storage front, the ASRock H61M-HP4 is equipped with multiple SATA III (6 Gb/s) ports, enabling faster data transfer rates for HDDs and SSDs. It supports RAID configurations, allowing users to implement redundancy and improve data access speeds. This capability is particularly beneficial for users who require high-speed data processing, such as gamers or content creators.

The H61M-HP4 also excels in connectivity options. It is fitted with multiple USB 3.0 ports, which facilitate high-speed data transfer to peripherals, enhancing the user experience. The presence of HDMI and DVI outputs indicates that the motherboard is equipped for high-definition video outputs, making it an excellent choice for media playback and casual gaming.

Additionally, the motherboard's robust power design ensures stable performance under load, which is crucial for sustaining the performance of high-end CPUs. Its built-in audio system, featuring 7.1-channel High Definition Audio, provides an immersive sound experience, further enriching media consumption.

Overall, the ASRock H61M-HP4 is an excellent choice for users who prioritize reliability, performance, and affordability. Its combination of solid features, support for the Intel LGA 1155 socket, and diverse connectivity options make it a valuable addition to any budget-conscious build. Whether for gaming, media consumption, or general productivity, this motherboard competently meets a variety of user needs, making it a worthwhile investment for both novice and experienced builders alike.