ASRock H61M-DGS manual How to Hot Plug a Sata / Sataii HDD

Page 30

How to Hot Plug a SATA / SATAII HDD:

Points of attention, before you process the Hot Plug:

Please do follow below instruction sequence to process the Hot Plug, improper procedure will cause the SATA / SATAII HDD damage and data loss.

Step 1

Please connect SATA power cable 1x4-pin end (White) to the power supply 1x4-pin cable.

Step 2

Connect SATA data cable to

the motherboard’s SATAII connector.

SATA power cable 1x4-pin power connector (White)

Step 3

Connect SATA 15-pin power cable connector (Black) end to SATA / SATAII HDD.

Step 4

Connect SATA data cable to the SATA / SATAII HDD.

How to Hot Unplug a SATA / SATAII HDD:

Points of attention, before you process the Hot Unplug:

Please do follow below instruction sequence to process the Hot Unplug, improper procedure will cause the SATA / SATAII HDD damage and data loss.

Step 1

Unplug SATA data cable from SATA / SATAII HDD side.

Step 2

Unplug SATA 15-pin power cable connector (Black) from SATA / SATAII HDD side.

30

Image 30

Contents H61M-DGS Copyright Notice DisclaimerContents Uefi Setup Utility Package Contents IntroductionSpecifications Unique Feature ConnectorBios Feature Rear Panel I/OCertiﬁcations HardwareMonitor See CautionPage Page Page Motherboard Layout H61I/O Panel LAN Port LED IndicationsPre-installation Precautions Screw HolesCPU Installation Page Installation of CPU Fan and Heatsink Installation of Memory Modules Dimm Installing a DimmInstalling an expansion card Expansion Slots PCI Express SlotsPcie slots Dual Monitor and Surround Display Features Dual Monitor FeatureSurround Display Feature For Windows XP / XP 64-bit OSWhat is HDCP? For Windows 7 / 7 64-bit / VistaTM / VistaTM 64-bit OSHdcp Function Jumpers Setup DescriptionOnboard Headers and Connectors Front Panel Audio Header Chassis Speaker Header ATX 12V Power Connector Please connect an ATX What is Hot Plug Function? Hot Plug Function for Sata / Sataii HDDsSata / Sataii HDD Hot Plug Feature and Operation Guide Sata power cableHow to Hot Plug a Sata / Sataii HDD Driver Installation Guide Installing Windows XP / XP 64-bit Without RAID FunctionsUsing Sata / Sataii HDDs with NCQ function Set Up Uefi Install Windows XP / XP 64-bit OS on your system Using Sata / Sataii HDDs without NCQ function Set up UefiIntroduction Uefi Menu BarNavigation Keys Main ScreenTo jump to the Exit Screen or exit the current screen OC Tweaker Screen Primary Plane Current Limit Short Duration Power LimitLong Duration Maintained Secondary Plane Current LimitDram tRP Command Rate CRMRC Fast Boot Dram tRASIgpu Voltage Offset User DefaultsVoltage Conﬁguration CPU Core Voltage Offset Dram VoltageAdvanced Screen Instant FlashCPU Configuration Hardware Prefetcher No-Execute Memory ProtectionIntel Virtualization Technology Adjacent Cache Line PrefetchNorth Bridge Configuration South Bridge Configuration Sata Controllers Storage ConfigurationSata Mode Selection Hard Disk S.M.A.R.TSuper IO Configuration Acpi Configuration USB Configuration USB 2.0 ControllerLegacy USB Support Over Temperature Protection CPU Fan SettingChassis Fan Setting Hardware Health Event Monitoring ScreenBoot Screen Security Screen Exit Screen Software Support Installing OS on a HDD Larger Than 2TB

Related manuals

Manual 165 pages 26.24 Kb