ASRock H61M-DG3/USB3 manual Driver Installation Guide

Page 32

2.13Driver Installation Guide

To install the drivers to your system, please insert the support CD to your optical drive first. Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from up to bottom side to install those required drivers. Therefore, the drivers you install can work properly.

2.14Installing Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit /

XP / XP 64-bit Without RAID Functions

If you want to install Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit / XP / XP 64- bit OS on your SATA / SATA2 HDDs without RAID functions, please follow below procedures according to the OS you install.

2.14.1 Installing Windows® XP / XP 64-bit Without RAID Functions

If you want to install Windows® XP / XP 64-bit OS on your SATA / SATA2 HDDs without RAID functions, please follow below steps.

Using SATA / SATA2 HDDs with NCQ function

STEP 1: Set Up UEFI.

A. Enter UEFI SETUP UTILITY Advanced screen Storage Configuration. B. Set the option “SATA Mode Selection” to [AHCI].

STEP 2: Make a SATA / SATA2 driver diskette. (Please use an USB floppy or a floppy disk.)

A. Insert the Support CD into your optical drive to boot your system.

B. During POST at the beginning of system boot-up, press <F11> key, and then a window for boot devices selection appears. Please select CD-ROM as the boot device.

C. When you see the message on the screen, “Do you want to generate Serial ATA driver diskette [YN]?”, press <Y>.

D. Then you will see these messages,

Please insert a diskette into the floppy drive. WARNING! Formatting the floppy diskette will lose ALL data in it!

Start to format and copy files [YN]?

Please insert a floppy diskette into the floppy drive, and press <Y>.

E. The system will start to format the floppy diskette and copy SATA / SATA2 drivers into the floppy diskette.

32

Image 32
Contents H61M-DG3/USB3 Copyright Notice DisclaimerContents Uefi Setup Utility Package Contents IntroductionSpecifications Connector AudioRear Panel I/O USBSupport CD HardwareMonitor CertificationsPage Unique Features ASRock Extreme Tuning Utility AxtuASRock Instant Boot ASRock Instant FlashASRock APP Charger ASRock XFast USBASRock XFast LAN ASRock XFast RAMASRock Crashless Bios ASRock Fast BootASRock OMG Online Management Guard ASRock Internet FlashMotherboard Layout H61I/O Panel LAN Port LED IndicationsPre-installation Precautions Screw HolesCPU Installation Page Installation of CPU Fan and Heatsink Installation of Memory Modules Dimm Installing a DimmPcie slots Installing an expansion cardExpansion Slots PCI Express Slots Dual Monitor and Surround Display Features Dual Monitor FeatureSurround Display Feature For Windows XP / XP 64-bit OSHdcp Function What is HDCP?For Windows 7 / 7 64-bit / VistaTM / VistaTM 64-bit OS Jumpers Setup DescriptionOnboard Headers and Connectors USB 3.0 HeaderSystem Panel Header Chassis Speaker Header Please connect the chassis ATX Power Connector Please connect an ATX power supply to this connectorHot Plug Function for Sata / SATA2 HDDs Serial ATA Sata / Serial ATA2 SATA2 Hard Disks InstallationWhat is Hot Plug Function? Sata / SATA2 HDD Hot Plug Feature and Operation Guide Points of attention, before you process the Hot PlugHow to Hot Plug a Sata / SATA2 HDD How to Hot Unplug a Sata / SATA2 HDDUsing Sata / SATA2 HDDs with NCQ function Set Up Uefi Driver Installation GuideInstalling Windows XP / XP 64-bit Without RAID Functions Install Windows XP / XP 64-bit OS on your system Using Sata / SATA2 HDDs without NCQ function Set up UefiIntroduction Uefi Menu BarPage Main Screen OC Tweaker Screen Short Duration Power Limit Dram Timing Configuration Load XMP SettingDram Configuration Dram tCL Primary Plane Current LimitCommand Rate CR MRC Fast BootDram tRP Dram tRASVoltage Configuration Power Saving Mode CPU Core Voltage OffsetIgpu Voltage Offset Dram VoltageAdvanced Screen CPU Configuration Adjacent Cache Line Prefetch Intel Virtualization TechnologyHardware Prefetcher North Bridge Configuration South Bridge Configuration Storage Configuration Sata Mode SelectionSata Aggressive Link Power Management Sata ControllersIntelR Rapid Start Technology IntelR Rapid Start TechnologyEntry After Active Page Threshold SupportIntelR Smart Connect Technology IntelR Smart Connect TechnologySuper IO Configuration Acpi Configuration USB Configuration USB 2.0 ControllerUSB 3.0 Controller Legacy USB SupportUefi Update Utility Instant Flash ToolOMGOnline Management Guard Internet FlashNetwork Configuration Internet Setting Uefi Download ServerHardware Health Event Monitoring Screen Boot Screen Fast BootBoot From Onboard LAN Setup Prompt TimeoutBoot Failure Guard Boot Failure Guard CountSecurity Screen Full Screen LogoExit Screen Install Operating System Support CD InformationRunning The Support CD Drivers MenuInstalling OS on a HDD Larger Than 2TB
Related manuals
Manual 138 pages 48.97 Kb